NACHI SA-G01-C5-C1-31 Solenoid Valve Guide: 2026 NG6 Double-Head Directional Control Specs & ROI

7 سبتمبر 2026

Pre-shipment Inspection Record: This document details the visual and technical inspection of the NACHI SA-G01-C5-C1-31 Solenoid Valve Guide: 2026 NG6 Double-Head Directional Control Specs & ROI. All product photos and testing videos below are original materials captured first-hand by the Koeed technical team in our warehouse prior to dispatch.

NACHI SA-G01-C5-C1-31: 2026 Guide

The NACHI SA-G01-C5-C1-31 is a wet-type double-solenoid directional control valve for NG6/CETOP 3 subplates. Rated 110V AC, it suits 4/3-way spool control in injection molding, presses, HPUs and material handling.

Model Code Decoding

SA: wet-type solenoid directional valve
G01: NG6/CETOP 3, ISO 4401-03
C: spring-centered spool
5: center position all ports blocked
C1: 100/110V AC coil
31: design series

Key Specifications

Parameter	Value
Max Pressure	25 MPa (250 bar)
Max Flow	Up to 40 L/min
Voltage	110V AC 50/60 Hz
Response	Typically 0.02-0.03 s AC ON
Mounting	NG6 / CETOP 3

Why It Matters in 2026

Wet-type solenoids run cooler and last longer because the core is oil-immersed. Double solenoids enable electric command of both spool directions, simplifying IT/OT integration via PLC, edge controllers or OPC-UA gateways. The consistent response supports predictive maintenance by trending coil current and actuation time.

Procurement tip: verify center spool type against fail-safe requirements and confirm coil voltage before ordering a drop-in replacement.