Omron R88D-GP08H 750W Accurax G5 AC Servo Drive Guide
On this page
The R88D-GP08H source concerns an Omron AC servo drive. The reviewed carton and physical drive both carry the complete model, and the second photograph confirms a 750W output rating. A G5-series document is visible beside the drive, without establishing a working motor-and-controller installation.
Identification and delivery details
The first photograph shows an OMRON carton labelled R88D-GP08H, AC SERVO DRIVER, Made in China and QTY 1. The label states the box quantity; it does not independently establish a historical delivery count, unopened original packing or current availability.
The second photograph shows the beige drive, connectors and an OMRON R88D-GP08H AC SERVO DRIVER label. Its input line gives 200–240V and 50/60Hz. The output line gives 0–240V, three-phase, 4.0A, 0–333.3Hz and 750W. These are label ratings rather than measured output.
A G5-series safety document lies beside the drive. Its document and copyright markings are not a manufacturing date or firmware revision. Neither the document nor the connectors in this view establishes a configured command interface, compatible motor, encoder setup or completed commissioning.
The source entry created on 22 July 2025 names Omron and China. It does not explicitly state condition, warranty duration or historical quantity. Its zero weight field supplies no usable weight evidence, and financial arithmetic is not used to infer a one-item delivery.
All six source photographs and the MOV clip were downloaded and retained, matching the actual old-body filenames. Only photographs one and two were visually reviewed; later images use neutral source captions. No witnessed motor run, fault-free power-up, parameter backup or electrical test is claimed.
The linked catalogue entry uses OMRON, the complete R88D-GP08H identifier and AC servo-drive category. A separate -Z variant was excluded. The catalogue link does not establish this recorded unit's condition or complete packing, and an enquiry still needs the exact drive revision, motor, encoder and machine interface.
| Item | Evidence |
|---|---|
| Brand / complete drive identifier | OMRON / R88D-GP08H |
| Input label entry | 200–240V; 50/60Hz |
| Output label entry | 0–240V; three-phase; 4.0A; 0–333.3Hz; 750W |
| Origin wording | Made in China on carton and drive; China in source |
| Visible packing / box label | OMRON carton; QTY 1 on box |
| Visible accompanying document | G5-series safety document; not a manufacture-date record |
| Condition / warranty / weight | Not established; zero weight field unusable |
| Record date | 22 July 2025 |
Swipe or scroll horizontally to read the full table.
The physical label supports the full model and 750W rating. Box QTY 1 is distinguished from an explicit delivery count. No condition, warranty, working-system compatibility or manufacture date is inferred from the carton, document or source's private arithmetic.
Matching this part
Compare the full drive code and revision with the installed motor, encoder, machine interface and supply requirements. Obtain the applicable manufacturer's commissioning documentation.
Confirm current condition, quantity, packing contents and warranty. Request a readable full label, parameter requirements and acceptance evidence appropriate to the machine.
Photos and recorded media
Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.
Related records and products
View the OMRON R88D-GP08H AC Servo Drive catalogue listing. Confirm the exact configuration and condition; a catalogue entry does not identify this delivered unit. For a full-drive and machine-interface comparison, contact KOEED with the installed drive and motor labels.
Request this part
Send the complete R88D-GP08H drive and motor labels, revision and required machine interface.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
