1XC-999 PLC Controller: Advanced Industrial Automation Solution
On this page
What is the 1XC-999?
The 1XC-999 on this record is a Sony XC-999 CCD colour video camera module — the slim industrial camera head marked 01B XC-999, DC12V, MANUFACTURED BY SONY, Made in Japan on its own extruded body — not a PLC controller as the listing title suggests. The build is the classic XC-series stick camera: a black finned aluminium barrel with the C-mount opening at the front exposing the teal CCD sensor, a 12-pin camera connector plus a small round output connector on the rear face, and a 5-way function DIP switch with two adjustment pots on the side (the B/R position legend printed above them). The rating panel carries the full trace: cULus E72675, serial NO. 49148, reference 3-173-527-03, with the FCC Part 15 compliance statement on the opposite flat. The unit photographed is one camera, record weight 0.5 kg, intake recorded 19 January 2026 — the record grades it 85% new with a six-month warranty line. Six photos and an inspection video show the module from sensor to connector panel.
Part details
| Field | Value |
|---|---|
| Maker / model | Sony XC-999 CCD colour video camera module, 01B version, Made in Japan |
| Supply | DC 12 V (body marking; matches the record note) |
| Sensor | CCD imaging sensor visible behind the C-mount opening |
| Connectors | 12-pin circular camera connector + small round output connector on the rear face |
| Adjustments | 5-way DIP switch (B / R, 1–6 legend) with two trim pots on the side face |
| Approvals | cULus E72675; FCC Part 15 statement on the body |
| Traceability | NO. 49148, ref 3-173-527-03 |
| Condition | Used-graded 85% new per the record, warranty line 6 months; intake 2026-01-19, record weight 0.5 kg |
Values are read from the module's own markings and the photographed construction; the condition grade and warranty figure follow the record.
Why this camera head still earns a slot
The XC-999 belongs to Sony's line of slim camera modules built for machine builders: a barrel that slides into tight assembly, a C-mount that takes the machine optics already on the line, and a 12-pin interface that lands on the camera control unit the rest of the system speaks. The colour CCD and the module-format body made it a common choice for inspection stations, medical-optics benches and embedded machine-vision heads — anywhere the camera disappears into the equipment rather than sitting on a tripod. The DIP-and-pot side panel is the commissioning interface: switch banks for the signal-mode options and the two trimmers for level setup, set once with a jeweller's screwdriver and left for the life of the installation.
The unit here is graded 85% new in the record — the barrel shows clean fins, the connector pins are unbent, and the sensor window is clear in the front photo. For a line still running the XC-series head, a like-number replacement avoids the frame-grabber and optics rework a modern camera swap would drag in; the C-mount glass bolts straight back on.
Photos and video
All images below are original KOEED warehouse photos. Click any photo to view it full size.
Sourcing help
KOEED supplies this product, in active and EOL stock. Send the part number for a quote.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
