2025/10/29 100009925, Sales records with pictures and video

30. říjen 2025

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

What is air filter 100009925?

The 100009925 is a large air-intake filter element for compressor installations, supplied here as a brand-new unbranded replacement — the carton carries only "Air Filter 100009925" on a plain white label. The element is built in the classic three-part compressor style: a pleated yellow cellulose media wall for the outer filtration area, a green perforated steel mesh band reinforcing the middle, and pink polyurethane end caps top and bottom — with the number 00009925 moulded into the cap rim, matching the listing number. Inside, the media continues against a metal inner mesh around the central mounting bore. It is a big element — the set weighs about 3 kg per the record — and it passed through the Koeed warehouse on 29 October 2025 as new replacement stock; the seven photos and video below show it as received.

2 min readContent reviewed 6 October 2026

Part details

Air filter 100009925, per cap moulding, carton label and record
Field	Value
Part number	100009925 (moulded "00009925" into the end-cap rim)
Type	Air-intake filter element for compressor installations, replacement (unbranded, per intake record)
Construction	Pleated yellow cellulose media; green perforated steel mesh band; pink polyurethane end caps; metal inner mesh sleeve around the centre bore
Fitment	Central mounting bore, radial seal on the end caps
Carton	Plain white label: "Air Filter 100009925"
Weight	About 3 kg (record)
Quantity	1 element
Condition	New, unused
Intake recorded	29 October 2025

Scroll sideways to see the full table.

Fitting notes

As an unbranded replacement, the check before ordering is dimensional: compare the cap diameter, the height and the centre-bore size against the element your compressor housing calls for, since the number 100009925 is what your parts book should also quote. On fitting, the radial sealing faces on the pink caps do the sealing — make sure both seats are clean before the element drops in, seat it square by hand (never push on the media wall), and close the housing evenly. The pleated yellow wall is the filtration surface, so keep the plastic wrap on until the moment of installation and bin any element that arrives with dented caps or opened pleats — the photos are the honest record of what ships.

Photos and video

All images below are original warehouse photos of the exact element covered by this record, taken before dispatch. Click any photo to view it full size.

Element full view — Full view: yellow pleated media over the green perforated mesh band, pink end caps both ends, shipping wrap below.

End cap with moulded number — End cap: the moulded "00009925" marking on the rim, centre mounting bore, radial seal and strengthening ribs.

Opposite end cap — Opposite end: the same moulded rim marking, caps undamaged and square.

Inside the element — Inside: pleated media against the perforated inner mesh sleeve, clean and undamaged through the bore.

Cap and bore close-up — Cap close-up: the sealing rings, centre bore and inner sleeve depth in one view.

Carton label: "Air Filter 100009925" — plain, unbranded replacement packaging.

Element second full view — Second full view: media pleats even along the whole circumference, mesh band tight, caps true.

Inspection video of this air filter, recorded at the Koeed warehouse on 29 October 2025.

For a branded filter comparison from the same shelf, see the 0110 D 010 BH4HC filter element set — seven logo-bearing replacements in the HYDAC numbering, documented the same way.