D12SP6FV: delivery record

The Banner D12SP6FV supply note records one new sensor with a one-year warranty, dated 28 May 2026. The reviewed photographs show a black sensor body with a coiled cable and a box labelled D12SP6FV, 33711 and EID:3033711. The box also states Assembled in the USA.

Identification and delivery details

The first photograph presents the sensor from a side where its full label cannot be read. Loose conductor ends are visible beside the coiled cable, and printed instructions are partly in view. Their presence does not establish a verified wire assignment, cable length or complete accessory set.

The second photograph supplies the readable model on the box. Assembled in the USA is retained as packaging wording; it does not independently establish the origin of every component. The selected note identifies BANNER and records a weight of 0.5 kg without defining a net or packed basis.

The source description calls this a complementary PNP fibre-optic sensor for glass fibres. Those are description-level specifications, not values read from the two photographs. Supply voltage, load current, response time and optical range are not established by this delivery evidence.

Swipe or scroll horizontally to read the full table.

Photographs 1 and 2 were visually reviewed. Five other source images are retained with neutral captions. The same first seven filenames also occur in another record, but the old article's actual D12SP6FV directory and complete media membership identify this sensor record; that overlap is not another sensor shipment.

Matching this part

Match D12SP6FV in full, including the FV suffix. Confirm the intended fibre assemblies and whether they are included in the offer. A common D12 housing does not establish the same output circuit or fibre connection.

Request the model wiring diagram and the supply and load limits needed by the installed controller. Ask for a readable unit label if packaging identity alone is insufficient. New condition and a warranty note do not constitute an optical or output-load test.

Photos and recorded media

Related records and products

View the 1PCS BANNER Sensor D12SP6FV catalogue listing. Confirm the exact configuration and condition; a catalogue entry does not identify this delivered unit. For the separate EX-L211 emitter/receiver delivery, see the Panasonic EX-L211 record. Its optical arrangement does not establish interchangeability with D12SP6FV. Contact Koeed with the required fibre and output configuration.