Omron E5CN-R2MT-500 Temperature Controller: Complete Guide for Industrial Automation

21. leden 2026

Pre-shipment Inspection Record: This document details the visual and technical inspection of the Omron E5CN-R2MT-500 Temperature Controller: Complete Guide for Industrial Automation. All product photos and testing videos below are original materials captured first-hand by the Koeed technical team in our warehouse prior to dispatch.

What is the MHMD082P1U?

The MHMD082P1U is a Panasonic AC servo motor, 0.75 kW from the MINAS family's MHMD frame — not an Omron temperature controller as the record's listing line suggests; every photo in the set shows the motor itself, so this article documents the servo. The rating label states the machine plainly: MODEL MHMD082P1U, INPUT 3φ AC 120 V 4.0 A, RATED OUTPUT 0.75 kW, RATED FREQ. 200 Hz, RATED REV. 3000 r/min, with the companion plate giving continuous torque 2.4 Nm at S1 duty, insulation class B (TÜV) / A (UL), IP65 sealing, Y (star) connection and serial 19080435N — Matsushita Electric Industrial Co. Ltd., Made in China. The carton identifies the works: 交流伺服电机 / AC SERVO MOTOR, 珠海松下马达有限公司 (Zhuhai Panasonic Motor), 原产地中国, standard Q/PMRZ 6, dated 2019-08-01. The motor is new stock with its factory wrap, two flying-lead connectors for power and encoder, and the standard warning set (do not impact the shaft; ground the earth terminal). This record is one motor, intake recorded 19 January 2026, record weight 0.5 kg. Seventeen photos and an inspection video cover the body, both labels, the shaft and the connector tails.

3 min readContent reviewed 8 October 2026

Part details

MHMD082P1U, as read from the motor labels
Field	Value
Brand / family	Panasonic MINAS-family AC servo motor, MHMD frame (Matsushita Electric Industrial Co. Ltd.)
Model	MHMD082P1U — 0.75 kW class, square-flange body
Input	3-phase AC 120 V, 4.0 A (label figure)
Rated output	0.75 kW — 200 Hz, 3000 r/min
Torque / duty	CONT. TORQUE 2.4 Nm, RATING S1 (continuous)
Construction	IP65, insulation class B (TÜV) / A (UL), Y (star) connection, square mounting flange, chrome shaft with protective cap
Wiring	Two flying leads with white connectors — power and encoder — dressed along the body
Identification	SER.No. 19080435N; carton: Zhuhai Panasonic Motor Co., Q/PMRZ 6, dated 2019-08-01, 合格 stamp
Warnings	Do not impact the motor shaft (轴に衝撃を加えない); ground the earth terminal (注意 label)
Condition	New with factory wrap, 1 unit; intake 2026-01-19, record weight 0.5 kg

Scroll sideways to see the full table.

Values are read from the two motor labels and the carton; the record's listing line named a different product, and the photographed unit governs this article.

Where the 750 W class earns its keep

The 0.75 kW / 3000 r/min class is the workhorse of small servo axes: enough torque for ball-screw slides on packaging and assembly machines, fast enough for pick-and-place indexers, and sized so a compact drive powers it without a braking-chopper. The MHMD frame is the square-flange 80 mm body with the connectors on flying leads — the A-series layout that drops into the majority of legacy Panasonic installations, with the encoder harness plugging straight into the matching MINAS drive. The label's numbers compose the duty picture: 2.4 Nm continuous at S1, 3000 r/min base speed, star-connected winding on a 120 V three-phase bus — a combination matched to the drives Panasonic shipped in the same era.

The unit here is factory stock from the Zhuhai works — the 2019-08-01 carton date, the 合格 (passed) stamp, the wrap still on the body, shaft capped against handling damage. For a line maintaining MINAS-era axes, a same-frame replacement with the original labelling restores the axis without touching the drive, the cable set or the machine program.