P50B05020DCL69: delivery record
On this page
The first photograph identifies a SANYO DENKI BL Super P5 AC servomotor, model P50B05020DCL69. Its nameplate provides concrete ratings for a replacement enquiry: 200 W, AC 200 V, 1.6 A and 3000 min⁻¹. The housing also shows visible paint wear, which should be considered alongside the source’s appearance description.
Identification and delivery details
The label identifies the complete model including DCL69 and states Made in Japan. It also carries an IP55 marking and a three-phase symbol. These are nameplate observations, rather than a current condition test or confirmation of protection after service.
Scraped paint is visible across the black housing near the label. The selected record describes the motor as looking new, so the photograph and that appearance wording should both remain available. Neither establishes the refurbishment history, bearing condition or an agreed sale grade.
The source record is dated 24 October 2025 and records 3 kg. It does not specify a warranty term or a weight basis. The Japan origin statement comes from the photographed nameplate rather than a shipping address or assumption about the brand.
Matching power and voltage alone would leave important differences unresolved. Keep the full P50B05020DCL69 identifier and confirm the feedback device, cable connections, shaft and mounting arrangement against the existing machine and its drive.
All nine distinct photographs and one recorded clip are retained. The first image is sufficient to read the principal nameplate; later stills have neutral source captions. No powered rotation, feedback test or installed positioning accuracy is inferred from this exterior inspection.
| Item | Evidence |
|---|---|
| Manufacturer / series | SANYO DENKI; BL Super P5 |
| Complete model | P50B05020DCL69 |
| Category label | AC SERVOMOTOR |
| Nameplate power / voltage | 200 W; AC 200 V |
| Nameplate current / speed | 1.6 A; 3000 min⁻¹ |
| Other nameplate marks | IP55; three-phase symbol; Made in Japan |
| Condition evidence | Visible paint wear; source describes appearance as looking new |
| Source date / weight | 24 October 2025; 3 kg recorded, scope unspecified |
Swipe or scroll horizontally to read the full table.
Photograph 1 supplies the manufacturer, full model and stated ratings. The appearance wording and weight are separately attributed to the selected source record.
Matching this part
Send the complete motor and drive labels, feedback connection details and existing shaft and flange measurements. Confirm the exact DCL69 suffix rather than replacing it with another P5 motor of similar power.
Request an offered-unit condition description and available rotation, feedback and insulation-test documentation from the supplier. Clarify included cables or accessories and any warranty offered for the specific unit.
Photos and recorded media
Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.
Related records and products
Send the motor and drive labels using Koeed contact details.
Request this part
Request the exact P50B05020DCL69 variant with confirmed feedback, mechanical fit and offered-unit condition evidence.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
