DMC10S2CR0100 Controller Module: Comprehensive Guide to Delta Motion Control System
On this page
What is the Yamatake DMC10S2CR0100?
Note on the listing title: the queue titles this article a "Delta Motion Control System" module — the part is not a motion controller. The DMC10S2CR0100 is a Yamatake (Yamatake Corporation, today's Azbil) DMC10-series distributed multi-channel controller module: a DIN-rail process-control unit with two universal analog inputs (CH1/CH2, mA or V), relay outputs, four event outputs, current-transmitter outputs, an RS-485 link on the base terminals, and a rear-edge connector that docks it into the DMC10 distributed I/O architecture. The front carries the ADR address selector (0/C/4/8), the LDR loader port and the PWR lamp; the rear label prints the full terminal map. Made in Japan, date code 0608 (August 2006), serial 060820196, approvals cULus, CE and KC, shipped with its Distributed Multi-channel User's Manual. One unit, new in the original box, 1-year warranty as recorded at intake. All 15 photos and 1 video below show this exact module.
Part details
| Field | Value |
|---|---|
| Model | Yamatake DMC10S2CR0100 |
| Family | DMC10 distributed multi-channel controller (user's manual: "DMC10S / DMC10 Distributed Multi-channel") |
| Inputs | 2 universal analog channels — CH1/CH2, mA or V (front terminals, A/B/C wiring per label) |
| Outputs | Relay outputs (terminals 11-12, 16-17); CT1/CT2 outputs; EV1-EV4 event outputs (23-26, 28-30) |
| Base terminals | 1-3: DC 24 V supply, 5 W max; 4-6: DA / DB / SG — RS-485 |
| Front controls | ADR address selector (0 / C / 4 / 8), LDR loader port, PWR LED |
| Connection | Rear-edge bus connector to the DMC10 backplane; 30-point front terminals (11-30) |
| Approvals | cULus (RS-485 noted), CE, KC (KCC-REM-A2B-A037 on the box) |
| Origin / date | Made in Japan — Yamatake Corporation (Azbil Corporation on the box line); D/C 0608, S/N 060820196 |
| Quantity | 1 unit, new in original box with user's manual; 1-year warranty as recorded at intake |
| Shipping weight | 0.5 kg as recorded |
Values are read from the module label, the factory box and the photographed terminals in the photo set.
What a distributed controller module does
In Yamatake's distributed control architecture, the intelligence sits next to the process, not in a central room: modules like the DMC10 mount on DIN rail inside the machine or panel, each carrying its own control loops, and report upward over the RS-485 link that lands on terminals 4-6. This S2CR build is the two-channel analogue workhorse of that family — CH1 and CH2 each take a universal input (the label's mA/V wiring shows the A/B/C terminal pattern that accepts a current or voltage transmitter), the module runs its control logic locally, and the outputs act on the process: dry relay contacts on 11-12 and 16-17, the CT outputs driving a final element, and EV1 through EV4 as the event/alarm contacts that trip when a loop leaves its band. The ADR selector assigns the module its address on the distributed bus, the LDR port accepts the hand-held loader for configuration, and the rear-edge connector carries both power and the internal bus to the mounting system. The 0608 date code puts this unit in Yamatake's last years under that name — the maker line on the box already carries Azbil Corporation beside the Yamatake head, a document of the brand's transition — and for panels built on this architecture, a sealed original module with its manual is the cleanest way to extend or repair a loop without disturbing the rest of the network.
Photos and video
All images below are original KOEED warehouse photos. Click any photo to view it full size.
Sourcing help
KOEED supplies this product, in active and EOL stock. Send the part number for a quote.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
