Mitsubishi DNMG150404-MS US735 Carbide Inserts: Comprehensive Guide for CNC Turning Applications
On this page
The first photograph shows three yellow insert cases labelled DNMG150404-MS, DNMG431MS and US735. MADE IN JAPAN is readable on each label. The March 30, 2026 record describes thirty new original inserts; three cases alone do not prove their unopened contents or count.
Identification and delivery details
The label circles material group M and prints cutting-speed values as 175-90 m/min, with 575-295 SFM beneath. Feed is printed as 0.28-0.11 mm/rev, with 0.011-0.004 IPR beneath. These are package recommendations associated with the printed M group, not measured cutting performance.
MITSUBISHI MATERIALS lettering is visible along the lower case edge. The record's 0.5 kg weight field has no net or packed basis, and the note does not specify warranty duration. The closed-case photograph does not document edge condition, coating composition or tool life.
| Item | Evidence |
|---|---|
| Package designations | DNMG150404-MS; DNMG431MS; grade US735 |
| Visible origin / brand | Made in Japan; Mitsubishi Materials case-edge lettering |
| Label application group | M circled on the printed P M K N S H sequence |
| Printed cutting speed | 175-90 m/min; 575-295 SFM, as printed for M |
| Printed feed | 0.28-0.11 mm/rev; 0.011-0.004 IPR, as printed for M |
| Delivery | Thirty new original inserts; March 30, 2026 |
| Warranty / weight | Warranty not stated; record weight 0.5 kg, basis unspecified |
Swipe or scroll horizontally to read the full table.
Only the first photograph was reviewed because the case labels provide identity and printed cutting guidance. All four photographs are retained. The dated note supplies the thirty-piece quantity; no machining trial or individual insert inspection is claimed.
Matching this part
Match the full DNMG150404-MS designation and US735 grade to the required holder and application. Confirm the geometry against exact manufacturer data before treating another DNMG grade or chipbreaker as a replacement.
Treat the printed cutting values as starting guidance tied to material group M. Select actual conditions using workpiece grade, rigidity and coolant requirements, and check the quotation's pack count. The label does not guarantee a particular finish or service life.
Photos and recorded media
Related records and products
The KORLOY NC3120 DNMG insert record describes a separate grade and chipbreaker. Send holder and workpiece details through Contact us.
Request this part
Specify DNMG150404-MS / US735, required insert count and holder. Include workpiece material and request current pack and edge-condition evidence with applicable supply terms.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
