2025/10/11 927566, Sales records with pictures and video
On this page
What is the Fuji Electric 927566?
The 927566 is a Fuji Electric power transistor module from Japan — the classic single-transistor GTR-package switch used in older drive and servo power stages. Each unit is a black epoxy body on a wide aluminium mounting base, with one main stud terminal moulded "E" (emitter) and two smaller screw tabs moulded "B0" and "B" (the base and auxiliary-base leads of a Darlington stage); the collector follows the module's base-plate convention, so integration belongs against the datasheet. Every label reads 927566, FUJI ELECTRIC, 2206, JAPAN, and the set of four weighs about 4 kg per the record. The intake record grades these plainly as refurbished presented as new (翻新充新) with a three-month warranty — the re-polished base plates in the photos show the refurbishment honestly. They passed through the Koeed warehouse on 11 October 2025; the eleven photos below show the four modules as received.
Part details
| Field | Value |
|---|---|
| Manufacturer | Fuji Electric — JAPAN on label, date code 2206 |
| Type number | 927566 |
| Type | Power transistor module (GTR/Darlington package, single stage) |
| Terminals | Main stud moulded "E"; two screw tabs moulded "B0" and "B"; cross-recess screws with washers on the main terminal |
| Construction | Black epoxy case on a wide aluminium mounting base, two mounting holes per flange wing; re-polished base plates (refurbishment) |
| Quantity | 4 modules, about 4 kg per record |
| Condition | Refurbished presented as new (翻新充新, per intake record); three-month warranty — base plates re-polished, faces and terminals clean |
| Intake recorded | 11 October 2025 |
Reading the terminals
The moulded legends do the identification work: the big stud terminal carries an "E" cast into the case below it, and the two smaller tabs read "B0" and "B" — the emitter, base and auxiliary-base leads of a Darlington transistor stage, exactly the pin-out of the GTR modules that populated inverter legs before IGBTs took over. Match the collector connection against the datasheet before wiring; the single-stud layout is the era's standard, but the board you are repairing decides the reference. The main stud takes its ring lug under a cross-recess screw and washer, and both small tabs take screw lugs the same way — torque them gently, since the epoxy towers around the tabs do not forgive overtightening.
Condition, stated plainly
The intake record calls these refurbished presented as new (翻新充新) with a three-month warranty, and the photos support the wording in both directions. The rework is visible where it should be: the aluminium base plates have been re-polished to an even brushed finish, brighter than a used part would normally sit. The active faces are clean — labels crisp and dated 2206, terminal hardware complete, epoxy corners undamaged. They are not factory-sealed originals, and the record does not pretend otherwise; judge the set from the eleven photos, and plan a bench test before committing them to a live drive.
Photos
All images below are original warehouse photos of the exact modules covered by this record, taken before dispatch. Click any photo to view it full size.
KOEED's records also include the Fuji Electric 6MBI300V-120-50 three-phase IGBT bridge and the International Rectifier 92-0196 IGBT module — neighbouring power semiconductors from the same shelf, photographed the same way.
Sourcing help
KOEED supplies Fuji Electric power modules and drive semiconductors, in active and EOL stock. Send the part number for a quote.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
