Honeywell C7027A1049 Minipeeper Ultraviolet Flame Detector: Comprehensive Technical Guide
On this page
Two C7027A1049-pattern ultraviolet flame sensors are documented in this 28 February 2026 delivery. The silver-and-purple bodies carry Honeywell-labelled C7027A 1049 U.V. SENSOR markings and coiled blue and white leads. The stock note explicitly identifies the goods as domestically made replacements, with a one-year warranty.
Identification and delivery details
The replacement classification remains part of the product description even though the boxes and bodies carry Honeywell wording. Packaging appearance and printed approval symbols do not establish Honeywell manufacture or the certification status of these offered replacement units. The photographs show two sensors and two cartons, matching the two-piece record.
The carton label reads MINI-PEEPER, TEMP. 0 to +215F, 1/2-inch FEMALE NPT, PIPE MTG and 8 FT. LEADS. Both carton labels show date code 2510. The body likewise prints 2510 and U.V. SENSOR; a reverse marking includes 32243-002 Rev.B. These are reported as printed identifiers, without decoding 2510 into an exact production date.
An end view shows the dark sensing aperture inside the hexagonal fitting. Other views show the purple sleeve, silver cable end and stripped ends of the blue and white wires. The photos do not measure the lead length, thread or detection response. The record's 0.5 kg field is not a measured weight for each detector. No burner commissioning or flame-failure test is supplied.
| Item | Evidence |
|---|---|
| Model marking | C7027A 1049; U.V. SENSOR |
| Recorded supply category | Domestically made replacement; Honeywell-labelled packaging/body |
| Carton description | MINI-PEEPER; PIPE MTG |
| Printed connection and leads | 1/2-inch FEMALE NPT; 8 FT. LEADS; not independently measured |
| Printed temperature line | TEMP. 0 to +215F, as printed on carton |
| Codes | 2510 on cartons and bodies; 32243-002 Rev.B on reverse label |
| Visible construction | Silver hex fitting; dark sensing aperture; purple sleeve; blue and white leads |
| Quantity and warranty | Two units; one-year recorded warranty |
| Record date and weight | 28 February 2026; 0.5 kg record field |
| Verification limits | Replacement certification and flame-response performance not established |
Swipe or scroll horizontally to read the full table.
Source: nine photographs, one inspection clip and the stock note. The table preserves printed package claims while keeping the recorded replacement status explicit.
Matching this part
Send the full existing detector designation, the flame safeguard controller model, the mounting connection and the approved replacement requirement. The C7027A1049 marking alone does not establish that these replacement units are acceptable for a particular burner safety system.
Request traceable manufacturer information and the relevant acceptance-test evidence for the offered units. This gallery documents delivery identity and appearance. Suitability for flame supervision must be assessed within the equipment's documented requirements; no safety-function approval is inferred from the printed symbols or the inspection clip.
Photos and recorded media
Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.
Related records and products
Use the contact page to supply the detector and flame-safeguard identification. Keep the domestically made replacement classification explicit in any C7027A1049 enquiry.
Request this part
Request C7027A1049-pattern replacements with quantity, controller model and the required manufacturer/test documentation. Confirm the offered product origin, acceptance criteria and one-year recorded warranty.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
