KT7030 Programmable Logic Controller | Advanced PLC for Industrial Automation
On this page
KT7030 in this record is a red handheld digital/analog multimeter. The reviewed face reads KT 7030, DIGITAL/ANALOG MULTIMETER and CAT II 600V, with a pointer scale above an LCD. Those markings establish a measuring instrument and resolve the PLC description in the retained article title.
Identification and delivery details
The source note is dated October 27, 2025; the record was created on October 28. It specifies the red version but does not state a quantity, warranty or condition clearly enough to supply those details. The photographed unit is accompanied by red and black probes.
The face has mA–V–Ω scale wording, battery-test bands for 9 V and 1.5 V, and printed DC 200 mV accuracy of ±(0.5% + 2). It also prints input impedance 10 MΩ and a separate analog accuracy statement of ±3% f.s. These are instrument markings, not results of a calibration performed for this delivery.
The structured weight entry is 1 in the source's weight field, while the handwritten tag explicitly says 1 g. The discrepancy is retained rather than converted into a measured weight. The first photograph crops part of the range selector, so the complete range list and terminal protection are not established here.
| Item | Evidence |
|---|---|
| Visible reference | KT 7030 |
| Instrument type | DIGITAL/ANALOG MULTIMETER |
| Printed category marking | CAT II 600V; no independent certification check |
| DC 200 mV accuracy print | ±(0.5% + 2) |
| Input impedance print | 10 MΩ |
| Analog accuracy print | ±3% f.s.; separate from digital statement |
| Battery-test scale | 9 V and 1.5 V bands |
| Source dates | Note October 27, 2025; created October 28 |
| Weight discrepancy | Structured field 1; tag says 1 g; no measured weight |
Swipe or scroll horizontally to read the full table.
Only photograph 1 was reviewed. Six remaining photographs and one video are retained without individual visual review. The visible category and accuracy labels do not constitute a calibration certificate or independently verified electrical-safety rating.
Matching this part
For sourcing, compare the exact KT 7030 face and model with the required instrument. Confirm the complete ranges, input-terminal design, supplied probes and documentation; the partly cropped selector is insufficient to reproduce every function.
If measurement traceability is required, request a current calibration record with its scope and uncertainty. Confirm the intended measurement environment against the applicable instrument and probe documentation before use.
Photos and recorded media
Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.
Related records and products
Send the required range list and instrument label through Contact us. This record documents a multimeter supply reference, not an automation controller or I/O module.
Request this part
Request the red KT 7030 with quantity, required accessories and calibration requirements. Confirm current condition, availability, warranty and the unresolved weight entry.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
