Omron CP1L-M60DR-D Programmable Controller: Comprehensive Guide and Technical Specifications

Omron CP1L-M60DR-D Programmable Controller: Comprehensive Guide and Technical Specifications

Pre-shipment Inspection Record: This document details the visual and technical inspection of the Omron CP1L-M60DR-D Programmable Controller: Comprehensive Guide and Technical Specifications. All product photos and testing videos below are original materials captured first-hand by the Koeed technical team in our warehouse prior to dispatch.

What is the Omron CP1L-M60DR-D?

The CP1L-M60DR-D is the mid-frame Omron SYSMAC CP1L PLC: 60 built-in I/O points — thirty-six 24 V DC inputs across channels 0-2 and twenty-four relay outputs across channels 100-102 — on a 24 V DC, 20 W CPU that programs over the front USB port and expands right-hand with CP1W units. The rear label carries the full rating block, cULus Listed 6VA2, CE, HazLoc Class I Div 2, Lot 17822S, Ver. 1.1, OMRON Corporation, made in China. The record books 3 units; four factory boxes appear in the photo set. All 10 photos and 1 video below show these exact units, refurbished with a 1-year warranty as recorded.

3 min readContent reviewed

Part details

CP1L-M60DR-D, as printed on the rear label
Field Value
Model Omron SYSMAC CP1L-M60DR-D
I/O 60 points: IN 00-11 (36x 24 V DC), OUT 00-07 (24x relay, channels 100-102)
Supply 24 V DC, 20 W, isolated
Input spec 24 V DC, 7.5 mA on 10 pts / 5 mA on 26 pts
Output spec Relay: 24 V DC resistive 2 A/point; AC general 2 A/point, 4 A/common, 28 A/unit; 240 V AC ratings 180/720/1440 VA per label
Programming USB behind the PERIPHERAL door
Expansion EXP connector, right side
Lot / version Lot 17822S, Ver. 1.1
Maker OMRON Corporation — made in China (Omron Shanghai label)
Approvals cULus Listed 6VA2, CE ON1875, KC KCC-REM-OMR-CP1L-00006, HazLoc Cl I Div 2 Gp A,B,C,D / Zh2 IIC, T4
Quantity Record books 3; 4 factory boxes photographed
Condition Refurbished, 1-year warranty as recorded
Shipping weight 2 kg each
Scroll sideways to see the full table.

Ratings are read from the rear label of the units in the photo set.

Where the M60 sits in the CP1L line

The CP1L ladder runs L (14 points), M (60) and E (40-60 types); the M60 is the built-in workhorse — enough native I/O that many machines never need an expansion rack, with the EXP connector there when they do. Thirty-six sink/source inputs handle a full sensor set; twenty-four relays switch valves, contactor coils and lamps at up to 2 A each without interposing parts, and the label's AC tables spell the group and unit totals for panel design. As with its L14 sibling, the USB port behind the PERIPHERAL door is the programming interface — CX-Programmer talks straight to it — and the BKUP LED's memory-write caution applies the same way. The four boxes in this record are Ver. 1.1, lot 17822S, with the Omron Shanghai trade label on the cartons, and they arrive refurbished — checked, cleaned and warranted for a year. For a build needing fewer points, the CP1L-M60DR-D listing covers this model and the CP1L-EM40DR-D sits between the frames.

Photos and video

All images below are original KOEED warehouse photos. Click any photo to view it full size.

Four Omron factory boxes
Four factory boxes stacked: TYPE CP1L-M60DR-D 可编程控制器, Ver. 1.1, LOT No. 17822S, QTY 1, barcodes 4547648403627, KCC-REM-OMR-CP1L-00006, the Omron (Shanghai) trade label, 合格 seal, MADE IN CHINA.
CP1L-M60 front view
The unit unboxed: BATTERY bay, PERIPHERAL door, the six status LEDs, the full-width IN cover (DC24V, channels 0/1/2, inputs 00-11), the OUT cover (channels 100-102, outputs 00-07) and the EXP connector at the right.
Output terminal row
The output terminal row exposed: two banks of captive screws under the 100CH/101CH/102CH channel legends.
Unit bottom view
The bottom: DIN-rail feet, the yellow release handle and the KOEED inspection seal.
Rear label close-up
The rear label at full size: OMRON CP1L-M60DR-D PROGRAMMABLE CONTROLLER, SOURCE 24V DC 20W, IN/OUT ratings with the relay life table, cULus LISTED 6VA2, HazLoc Class I Div 2, CE ON1875, Lot 17822S Ver. 1.1, OMRON Corporation, MADE IN CHINA.
Second unit front
A second unit from the lot: same build, terminals and legends.
Third unit front
Third unit: the IN terminal cover legends (00 through 11) and the OUT row in one view.
Unit underside
The underside of another unit: DIN foot, release latch and ventilation grilles.
Fourth unit output row
Fourth unit: the output terminals with all screw caps in place.
Box label close-up
Box label at reading distance: model, Ver. 1.1, lot 17822S, barcode and the Chinese trade line for Omron (Shanghai).
Inspection video: the units as they were checked at the KOEED warehouse.

Sourcing help

KOEED supplies this product, in active and EOL stock. Send the part number for a quote.

Need a quote for this part?

Send us the part number or article link — we will confirm price, availability and lead time.

WhatsApp us

Related Articles

Zurück zum Blog