FANUC A660-2007-T364 L10R53A 10M Teach Pendant Cable: Complete Guide for Industrial Automation

This A660-2007-T364 record contains photographs of coiled pendant-cable assemblies with different secondary labels. One label reads #L-10.5MA; another reads #L10R53A. The legacy title's 10M description is retained in the title, while the source entry also states 15 m. The photographs do not resolve these descriptions into one measured cable length.

Identification and delivery details

The assemblies have black outer jackets, a circular metal coupling connector at one end and a black rectangular multi-contact connector at the other. Coloured individual wires are visible between the jacket and rectangular housing. Close views show connector faces, a latch on the rectangular housing and the threaded circular coupling. These details are useful for matching an existing cable, but they do not establish a pin assignment or compatibility with every FANUC pendant.

The earlier photographs show A660-2007-T364 and #L-10.5MA on a sleeve label. Later views show A660-2007-T364 and #L10R53A. The primary part reference is therefore consistent, while the secondary identifiers differ. Neither a coiled photograph nor the digits in a label provide an independently measured end-to-end length. Confirm the exact suffix and required length with a full label view and a measurement before ordering.

The source contains two distinct supply entries, each for one cable: an entry dated 11 March 2026 and a second transaction noted on 27 March with a 1 April update. Both describe new condition. They represent two recorded cables across separate transactions, not two cables guaranteed in one current offer. The first entry mentions 3 kg; the later note and weight field use 2 kg. These weights are kept separate from length and electrical specifications. No warranty term, continuity report or country-of-origin evidence is supplied.

Swipe or scroll horizontally to read the full table.

Photo labels take precedence when identifying the pictured variants. The 10M title, 15 m entry and differing secondary labels are presented together rather than silently selecting a length. New condition is a source statement; the photographs do not authenticate original manufacture or prove conductor continuity.

Matching this part

Provide the pendant and controller references, the existing cable's full primary and secondary labels, and clear photographs of both connector faces. Check keying, latch position, contact layout and the approved wiring diagram before connecting a replacement.

Specify the required measured length and routing allowance. Ask for continuity and insulation checks appropriate to the cable, confirm the offered suffix, and obtain an explicit warranty term. The two historical transactions should not be treated as current stock quantity.

Photos and recorded media

Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.

Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.

Related records and products

The A98L-0001-0865#AR key-sheet record covers a separate operator-panel face sheet. A shared application category does not establish that the sheet and this cable fit the same pendant. Contact KOEED with the full pendant and cable references.