PSRD006: delivery record
On this page
The rear label identifies HANDY PULSER, TYPE PSRD006 and NIDEC SANKYO CORPORATION. The reviewed front carries brother lettering on the handwheel. These markings describe the photographed pendant without certifying compatibility with every Brother CNC machine.
Identification and delivery details
The first photograph shows the black rear cover, carry loop, coiled cable and four corner screws. The label reads HANDY PULSER and TYPE PSRD006, with NIDEC SANKYO CORPORATION below. The serial entry is not interpreted as a manufacture date.
The second view shows the front handwheel with a numbered circular scale and metal handle, two selector knobs and HANDY PULSER wording. Brother lettering is visible on the wheel. No pulse output, selector contact or machine motion test is demonstrated.
The note dated 27 October 2025 explicitly records one item described as new and original with a two-year warranty. Manufacturer and country of origin are not stated in the tag; the reviewed rear label supplies the manufacturer marking, while new-original condition remains a source declaration.
The source contains two weights: the weight field and opening tag say 2kg, while a later tag entry says 1.5kg. Neither entry defines its weighing scope. Both are retained, without selecting one as a confirmed bare-unit or shipping weight.
All six source photographs are retained; the record has no clip. Only the first two photographs were visually reviewed. The photographed cable and controls do not establish connector pinout, pulse resolution or installed-machine compatibility.
The available KOEED catalogue candidate calls the item Brother-dedicated and offers a different warranty term. It does not explicitly identify the reviewed Nidec Sankyo manufacturer/variant, so it is not linked as a confirmed original-unit match. Full connector and machine-interface evidence is required before replacement.
| Item | Evidence |
|---|---|
| Reviewed label type | HANDY PULSER / PSRD006 |
| Reviewed manufacturer marking | NIDEC SANKYO CORPORATION |
| Front marking / controls | brother / handwheel and two selectors |
| Pulse resolution / pinout / machine fit | Not verified |
| Historical quantity / condition / warranty | One item / described as new and original / two years |
| Origin | Unspecified |
| Conflicting source weights | 2kg and 1.5kg; both scopes unspecified |
| Record date | 27 October 2025 |
Swipe or scroll horizontally to read the full table.
Rear manufacturer, front machine-brand marking and source supply terms are separately attributed. The conflicting 2kg and 1.5kg entries are not silently resolved or used as a shipment calculation.
Matching this part
Provide full offered-unit labels, selector legends, connector photographs and pinout documentation for PSRD006. Confirm the intended Brother machine/control and exact interface requirements.
Resolve the source weight scopes and agree present package contents, condition, quantity and warranty. Request a suitable pulse/selector acceptance result with the intended controller before commissioning.
Photos and recorded media
Related records and products
Send pendant labels, connector photographs and machine identifiers through the contact page.
Request this part
Request PSRD006 after confirming the manufacturer, exact machine interface and full cable/connector variant.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
