KLÜBER to Mobil Specialty Grease (Vacuum, PFPE, Silicone) Cross-Reference Table
| KLÜBER Product | Equivalent Product | Compatibility & Notes |
| Barrierta L 55/2 | Mobilgrease 28 | PFPE/PTFE vs clay/synthetic hydrocarbon. Barrierta L to 260°C/vacuum. Mobilgrease 28 to 180°C. Not equivalent. |
| Barrierta EL 102 | No direct Mobil equivalent | PFPE lubricating fluid for vacuum pump bearings and precision mechanisms. Mobil has no PFPE fluid product. |
| UNISILKON L 250 L | Mobilgrease 28 | Silicone vs clay/synthetic hydrocarbon. UNISILKON for low-load, high-temperature to 200°C. |
| ALTEMP Q NB 50 | No direct Mobil equivalent | PFPE/PTFE grease combining thermal and chemical resistance. No Mobil equivalent in this product category. |
| Klüberspeed BF 72-22 | Mobil Polyrex EM | Both polyurea for electric motor bearings. Kluberspeed has enhanced low-noise characteristics. |
Reference: Published product datasheets from KLÜBER Lubrication and Mobil. Verify with current datasheets before substitution.
⚠ Important Disclaimer
This cross-reference is provided for informational purposes only. Equivalent does not mean identical — differences in thickener type, base oil viscosity, additive packages, and NLGI grade can affect performance. Always verify technical compatibility by consulting both manufacturers' datasheets and obtaining OEM approval before substituting lubricants. Contact KOEED for verified KLÜBER product recommendations matched to your specific application requirements.
> Tip
When cross-referencing, always verify: (1) thickener compatibility — mixing incompatible thickeners can cause grease to soften or harden, (2) base oil viscosity at operating temperature, (3) NLGI grade for proper consistency, (4) certification status (NSF H1, ISO 21469) for food-grade applications. If in doubt, contact KOEED for a verified recommendation.
Frequently Asked Questions
Q: Does Mobil offer any PFPE-based grease?
No. Mobil's grease portfolio does not include PFPE (perfluoropolyether) based products. For applications requiring PFPE greases — extreme temperatures (>220°C), ultra-high vacuum (UHV), aggressive chemical environments, or oxygen service — KLÜBER Barrierta L and ALTEMP Q series are the relevant specialty products. Contact KOEED for technical consultation on PFPE grease selection.