HYDAC 0110 D 010 BH4HC Filter Element: Complete Technical Guide for Industrial Automation Systems

12 janvier 2026

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

What is the HYDAC 0110 D 010 BH4HC?

The 0110 D 010 BH4HC is a HYDAC hydraulic return-line filter element in the 0110 series: Betamicron®-2 glass-fibre media rated at 10 µm absolute, built in the BH4HC high-capacity formulation for maximum dirt-holding between changes, with the L/BJ-E end-cap configuration that drops into HYDAC's matching filter housings. The metal end cap is laser-engraved 0110 D 010 BH4HC, "Made by HYDAC" and the L/BJ-E code; the carton carries the HYDAC part number 1265873 against the element string, and the white microglass wrap is printed Betamicron®-2 down its length. These are the consumables that keep a hydraulic power unit's oil cleanliness at target — swap them on the clogging indicator, not on the calendar. Ten units, new in original HYDAC cartons, 3-month warranty as recorded at intake. All 8 photos and 1 video below show these exact elements.

2 min readContent reviewed 8 October 2026

Part details

0110 D 010 BH4HC, as printed on the cap and carton
Field	Value
Model	HYDAC 0110 D 010 BH4HC
HYDAC part number	1265873 (carton label)
Type	Hydraulic filter element, return-line class
Media	Betamicron®-2 glass fibre (BH formulation), high-capacity (HC)
Filtration rating	10 µm (the "010" in the string)
End configuration	L/BJ-E (engraved on the end cap)
Engraving	"0110 D 010 BH4HC · Made by HYDAC · L/BJ-E" on the metal cap
Quantity	10 units, new in original HYDAC cartons; 3-month warranty as recorded at intake
Shipping weight	0.5 kg per unit as recorded

Scroll sideways to see the full table.

Values are read from the end-cap engraving and the factory carton labels in the photo set.

Reading the element string, and why genuine media matters

HYDAC's element string packs the whole specification into four groups. "0110 D" is the size and end-cap family — the geometry that must match the housing, because an element that fits loosely bypasses unfiltered oil around its ends. "010" is the filtration rating: 10 µm, the working standard for return-line filtration on industrial hydraulics, fine enough to hold the silt that grinds pumps and valves, coarse enough not to choke mid-life. "BH4HC" names the media: Betamicron glass fibre in the high-capacity build, which holds more dirt per element than the standard formulation — the difference between changing filters monthly and quarterly on a dirty system. The "L/BJ-E" suffix fixes the end-cap hardware, the part a fitter matches by eye. All of this is consumable economics: the element costs a fraction of the pump it protects, and the Betamicron-2 media's graded-fibre structure is what delivers the stable beta-ratio the system designer counted on — which is why the engraving says "Made by HYDAC" and the carton repeats it. Ten factory-sealed elements are photographed here: one machine's change cycle covered, or a service van's stock for the year.