MR-PWCNK1-3M: delivery record

7 juillet 2026

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

The source records eighteen new MR-PWCNK1-3M cables with a one-month warranty. Its note is dated 4 January 2025, while the record creation timestamp is 4 January 2026; that discrepancy is retained. Photograph 2 shows individually bagged coiled cables with matching reference labels.

Identification and delivery details

Photograph 1 is a close view of a black connector through a clear bag. Photograph 2 shows labels reading MR-PWCNK1-3M and QTY:1PCS, with Chinese wording for a servo power cable. Ring-terminal wire ends are visible on several coils. These labels do not establish original Mitsubishi manufacture.

The bag quantity describes an individual package. The recorded supply is eighteen cables, not eighteen pieces per bag. The 3M suffix is retained as part of the full reference, without claiming a measured length or authenticated pinout.

The weight field is 0.5 kg without a specified per-cable or lot basis. No continuity, insulation or motor-compatibility test is established by these views. The title's MR-J2S application still requires the exact motor and connector requirements to be checked.

Photographed markings and delivery record
Item	Evidence
Bag reference	MR-PWCNK1-3M
Visible package quantity	QTY:1PCS on individual bags
Recorded supply/condition	Eighteen new cables
Recorded warranty	One month
Date discrepancy	Note 4 January 2025; creation 4 January 2026
Visible termination	Black connector; ring-terminal wire ends on several coils
Source weight	0.5 kg, unit/lot basis unspecified
Unverified	Manufacturer, measured length, pinout and electrical test

Swipe or scroll horizontally to read the full table.

Seven photographs, including a PNG source file, and one MP4 completed GET download and byte/SHA-256 checks. Only photographs 1 and 2 were reviewed; five photographs retain neutral source captions.

Matching this part

Specify the complete MR-PWCNK1-3M reference, installed motor/drive labels and required connector/pin assignments. The linked listing is for a cable intended for Mitsubishi equipment and does not authenticate original manufacture.

Confirm the required cable count, individual package contents and one-month warranty. Request length and electrical-test evidence and clarify which dated source entry applies.

Photos and recorded media

Reviewed photograph 1: close view of a black connector through a clear cable bag; no model label visible in this close view.

Reviewed photograph 2: individually bagged coiled cables with MR-PWCNK1-3M and QTY:1PCS labels; several ring-terminal wire ends visible.

Source-record photograph 3 filed under MR-PWCNK1-3M.

Source-record photograph 4 filed under MR-PWCNK1-3M.

Source-record photograph 5 filed under MR-PWCNK1-3M.

Source-record photograph 6 filed under MR-PWCNK1-3M.

Source-record photograph 7 filed under MR-PWCNK1-3M.

Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.

View the 1PCS MR-PWCNK1-3M For MITSUBISHI MR-J2S Power Cable catalogue listing. Confirm the exact configuration and condition; a catalogue entry does not identify this delivered unit. Compare the separate MR-J3ENSCBL30M-H record for another cable reference, without treating power and encoder cable references as substitutes.