PDMB200E6: delivery record

9 août 2026

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

This PDMB200E6 source record shows seven black power modules, first in protective bags and then unpacked on a workbench. The visible terminal labels include C2/E1, E2 and C1, with paired small pins at the ends. That construction differs from the title’s three-phase diode-bridge description and needs a complete module-label check.

Identification and delivery details

The first photograph shows seven bagged modules and a separate packet of fasteners. The group is photographic evidence from the record; it does not establish seven present-stock units or an additional delivery for each package.

The second view shows the modules’ top faces. Each has three large metal power-terminal pads with threaded openings, mounting holes and smaller pin pairs. C2/E1, E2 and C1 can be read on a module in this view.

A complete NIEC/PDMB200E6 label and the claimed 200 A/600 V ratings are not readable in the two reviewed photographs. The C/E terminal designations must be reconciled with the title’s diode-bridge category before a replacement is selected.

The source dated 24 July 2025 gives Japan as the manufacturing country. No origin marking is readable in the reviewed module faces, so Japan remains a source statement. Condition, warranty and a usable weight are not documented.

Nine distinct photographs and one clip are retained. Terminal layout alone does not establish a current rating, semiconductor type or a measured switching/rectification result for the offered unit.

Photographed markings and delivery record
Item	Evidence
Source identifier	PDMB200E6
Photographed group	Seven modules; separate fastener packet in first view
Readable terminal labels	C2/E1, E2 and C1
Visible construction	Three large terminal pads, smaller pin pairs and mounting holes
Complete manufacturer / model	Not readable in the reviewed views
Title category / ratings	Three-phase diode bridge and 200 A/600 V require reconciliation and label evidence
Source origin / date	Japan according to note; 24 July 2025
Condition / warranty / weight	Not documented in usable detail

Swipe or scroll horizontally to read the full table.

The C/E terminal labels and module construction are direct photograph evidence. The diode-bridge description and electrical ratings in the title are retained as unresolved identification claims.

Matching this part

Provide readable photographs of the installed and offered modules’ full manufacturer, model and rating labels. Confirm the internal circuit diagram and terminal designations before selecting a rectifier or transistor-module replacement.

Compare terminal positions, mounting dimensions and the base arrangement. Request an electrical inspection report for the identified module type and confirm the supplied fasteners, condition and warranty terms.