ABB A16-30-01 PLC Contactor: Comprehensive Guide to Industrial Motor Control Solutions

6 जनवरी 2026

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

What is the ABB A16-30-01?

The A16-30-01 is an ABB line contactor: three main poles (1/L1, 3/L2, 5/L3 in; 2/T1, 4/T2, 6/T3 out) plus one built-in auxiliary contact — the -01 suffix means it is normally closed, on terminals 21-22 — with the coil wired A1-A2 at 110/120 V, 50/60 Hz. The A-frame is the 16 A AC-3 class; the rating table on the top cover starts at 4 kW on 230 V and 7.5 kW on 400 V. The record holds 2 units, new in original packaging, made in China, coil code R84. All 7 photos and 1 video below show the exact units covered by this record.

3 min readContent reviewed 7 October 2026

Part details

A16-30-01, as printed on the body and top cover
Field	Value
Model	ABB A16-30-01
Main poles	3 (L1/L2/L3 to T1/T2/T3)
Auxiliary contact	1 N.C. (21-22), built in per the -01 suffix
Coil	A1-A2, 110/120 V, 50/60 Hz, code R84
AC-3 rating table	4 kW at 230 V, 7.5 kW at 400 V (further points printed on cover)
Max rated voltage	Ue 690 V
Standards	IEC 60947-4-1, EN 60947-4-1, CE, CCC, cULus Listed (industrial control, 600 V AC max)
Terminal data	AWG 10-18 Cu stranded, torque approx. 1 N·m (9 lb-in)
Mounting	35 mm DIN rail or screws on 50/55/60 mm centres
Origin	Made in China
Quantity	2 units, new
Shipping weight	0.5 kg total

Scroll sideways to see the full table.

Ratings are read from the top-cover print and terminal mouldings in the photo set; the continuous-current and full kW-table figures are printed on the cover of each unit.

How the -01 contact earns its place

The "-30-01" suffix reads as three poles, zero built-in N.O. contacts, one N.C. contact — and that single 21-22 pair is what most starters actually need. It breaks the coil circuit of the same contactor (seal-in wiring) or feeds the "running" lamp on the door, without buying a separate side-mounted auxiliary block. The coil at 110/120 V 50/60 Hz is the standard control-transformer voltage in North American-style panels; a control circuit running at other voltages would need the matching coil code instead. Terminals take AWG 10-18 stranded copper at roughly 1 N·m, and the body snaps to a 35 mm DIN rail or screws down on 50, 55 or 60 mm centres — the three-way hole pattern is moulded into the base. KOEED's A-series stock covers other frames and coil voltages, including the larger A50-30-11 at 220-230 V and the A50-30-11 at 24 V AC.