For Glory Pro 3.8V Battery G1: Essential Backup Power Solution for PLC Industrial Automation Systems
On this page
What is the Glory Pro (G1) 3.8V replacement battery?
This is the replacement lithium-polymer battery pack for the Glory Pro (G1) device — a single-cell pouch pack, cell type PLG926076 rated 3.85 V, with its protection FPC tail marked 2112 HT-X6-27-A0 and the factory trace codes HDACE001 with batch numbers G0B01046 and G0B01037. This record is a pair of factory-new packs from two separate purchases, both booked as genuine original supply. All eleven photos show these exact packs.
Part details
| Field | Value |
|---|---|
| Application | Glory Pro (G1) device — replacement battery |
| Cell type | PLG926076 lithium-polymer pouch cell, 3.85 V nominal |
| Trace codes | HDACE001; batch G0B01046 (pack 1) and G0B01037 (pack 2); QR code printed beside the marking |
| Protection tail | Black FPC marked 2112 HT-X6-27-A0, multi-pin connector, P−/TP+ legends |
| Construction | Aluminium-foil pouch with black edge wrap, +/- polarity printed on the face |
| Anti-counterfeit | Red scratch-check sticker (撕数无效) on the label face |
| Quantity | 2 packs, factory-new, from intakes of 23 October 2025 and 13 March 2026 |
Values are read from the cell markings and the photographed construction in the photo set.
Fitting a pouch replacement
A pouch-cell replacement is a fit-exact part: the PLG926076 footprint, the FPC tail position and the connector pinout have to match the device cavity, which is why the cell type and the FPC marking matter as much as the voltage. The 3.85 V nominal rating is the modern high-voltage lithium-polymer chemistry — same charging profile family as current phone packs — and the protection FPC (the black tail with its P−/TP+ legends) carries the pack's protection circuit and thermistor lines to the device board. Swapping one in is a battery-bay job: disconnect the old pack at the FPC connector, lift it free, seat the new pack, connect the tail, and the device is back to a full day of runtime.
The two packs in this record are factory-traceable — QR codes on the foil, HDACE001 codes, the red scratch-check anti-counterfeit sticker still on the label face — from two purchases eleven months apart. For a Glory Pro owner whose original pack has swollen or lost capacity, these are the genuine-replacement route.
Photos
All images below are original KOEED warehouse photos. Click any photo to view it full size.
Sourcing help
KOEED supplies this product, in active and EOL stock. Send the part number for a quote.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
