Mitsubishi G170EG01 V.1 Industrial HMI Display: Complete Technical Guide
On this page
What is the G170EG01 V.1 LCD panel?
The G170EG01 V.1 is AU Optronics' current-revision 17-inch SXGA industrial TFT panel — 1280 × 1024 resolution, CCFL backlight, metal frame — the V.1 build of the cell that Mitsubishi and other HMI terminals fitted. The rear label reads the identity straight: Manufactured 24/12 (December 2024 — recent production, not old stock), Model No: G170EG01 V.1, 01XXG, AU Optronics, MADE IN CHINA (S1), cRUus E204356, RoHS Pb-free, with barcodes AU-----0CCLT7SZ243NF24K and 7E49CK0LZKZZ-ZS0101, and the materials line F15915G1800283100014K4E197626. Factory-new, one-year warranty as recorded at intake on 17 December 2025. All nine photos and the inspection video show this exact panel.
Part details
| Field | Value |
|---|---|
| Brand | AU Optronics — MADE IN CHINA (S1 plant), manufactured December 2024 |
| Model | G170EG01 V.1, 01XXG — 17.0-inch SXGA industrial TFT |
| Resolution | 1280 × 1024 (SXGA class, per intake record) |
| Backlight | CCFL, two lamp sets with white plug connectors taped to the rear |
| Signal | LVDS connector along the bottom edge |
| Construction | Aluminium front bezel over a stamped rear shield; label row: 7E49CK0LZKZZ-ZS0101, AU-----0CCLT7SZ243NF24K, F15915G1800283100014K4E197626 (LGP>PMMA, Frame>PC-GF10FR<76>) |
| Markings | cRUus E204356, RoHS Pb-free, 15 recycling, QC PASS 06 sticker; workshop YD dated sticker |
| Condition | Factory-new, 1-year warranty, intake 17 December 2025 |
Values are read from the rear labels and the photographed construction in the photo set.
V.1 versus the older V.0
The version suffix on an AU Optronics panel is the revision of the cell inside the same fitment: the G170EG01 V.1 is the direct successor to the V.0, in the same 17-inch frame, with the same SXGA resolution, the same LVDS interface and the same two-lamp CCFL backlight arrangement — but built on a newer production line with the refinements that twelve years of panel making brought. For a terminal whose original panel died, the V.1 is the current-production route to the same fitment: bolt into the same bezel, land the same LVDS ribbon and the same lamp plugs, and the terminal is back without touching its controller or its calibration.
This unit is factory-new with a December 2024 manufacture date — recent production, not shelf stock: the film is still on the polariser, the CCFL leads are still taped in their factory positions, and the QC PASS sticker sits square on the shield. For a service shop supporting Mitsubishi-era terminals, keeping a V.1 on the shelf is the clean answer to the end-of-life panel problem — the same fitment, still being made.
Photos
All images below are original KOEED warehouse photos. Click any photo to view it full size.
For the earlier V.0 revision of the same cell, see the G170EG01 V.0 — the 2012-production unit, documented from the same warehouse.
Sourcing help
KOEED supplies this product, in active and EOL stock. Send the part number for a quote.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
