Q25SP6FF100Q: delivery record

The Q25SP6FF100Q record combines two dated supply notes. The first explicitly describes new domestic replacements carrying labels, while the later note names BANNER and US manufacture. The reviewed labels display BANNER and Made in USA, but those markings cannot resolve the earlier replacement declaration or authenticate both recorded lots.

Identification and delivery details

The first photograph shows two yellow rectangular sensor housings with threaded connection ends and black locking nuts. No model label is visible on that side.

The second photograph shows two labels reading Q25SP6FF100Q, BANNER, 10-30V dc, 150mA max load and Made in USA, together with a connection diagram. These are observed markings; the photograph does not independently establish original manufacture or an environmental approval.

The 8 December 2025 note explicitly records two new domestic replacements with labels and a historical one-week lead time. It also carries a US-origin reference. That contradiction is preserved instead of describing the replacements as authenticated US-made Banner products.

The 5 March 2026 note explicitly records four new items, US manufacture and a one-year warranty. The merged record does not assign each photograph or clip to a particular dated lot. The two photographed housings do not establish present stock, and the two historical quantities are not combined into a current six-unit offer.

The source weight is 0.5kg without a stated weighing scope. All eleven photographs and both source clips are retained, including the second clip missing from the old article. Only the first two photographs were reviewed; the later images carry neutral source captions.

The retained title describes fixed-field washdown detection. The reviewed views do not establish sensing distance, washdown performance, ingress rating or successful switching tests. Before selecting a replacement, resolve the intended manufacture and exact configuration as well as the installation's detection requirement.

Swipe or scroll horizontally to read the full table.

The domestic-replacement declaration conflicts with an unqualified Banner-origin reading of the title. The later source note and photographed US wording are stated separately without authenticating either lot or increasing present supply.

Matching this part

State whether the request permits a domestic replacement or requires verified original Banner manufacture. Obtain readable labels and traceability for the particular offered lot rather than relying on this merged photo set.

Confirm exact model, electrical/output and connector configuration, detection distance and required environmental performance from documentation for the offered version. Agree quantity, warranty and switching/installation acceptance criteria.

Photos and recorded media

Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.

Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.

Related records and products

Clarify the permitted manufacture and lot through the contact page.