ELTEK FLATPACK2 2000W 48V Rectifier: High-Efficiency Power Solution for Industrial Automation

27 Januari 2026

Pre-shipment Inspection Record: This document details the visual and technical inspection of the ELTEK FLATPACK2 2000W 48V Rectifier: High-Efficiency Power Solution for Industrial Automation. All product photos and testing videos below are original materials captured first-hand by the Koeed technical team in our warehouse prior to dispatch.

The Eltek FLATPACK2 48V/2000W HE is the rectifier module that fills most telecom 48 V plants — slide it into the shelf, and it converts 100–250 V AC into 53.5 V DC at 37.4 A (2 kW) with the HE-series high-efficiency design. Five used pulls arrived on 2026-01-26, part number 241115.105, revision 2.3, made in China, each still carrying its shelf-slot label from the exchange it came out of (PR1-Slot4, PR2-Slot6/7/8), 2.5 kg per module.

What the nameplate says

Item	Value on label
Part name	FLATPACK2 48/2000 HE
Part number	241115.105
Revision	2.3 (SW 01.13 / 01.12)
AC input	100–250 VAC, 45–66 Hz, 12.5 A max, fuse 15 A F
DC output	53.5 V / 37.4 A (2000 W)
Design	Designed by Eltek Valere, patent pending
Origin	Made in China
Serials	115271146490, 120571119627, 124571108573, 1025711148354, 142571803390

The front panel is printed FLATPACK2 HE 48V/2000W beside the fan intake and the status LEDs; the green Eltek mark sits at the corner. Certification block covers cULus, CE, TUV and the lead-free mark.

FLATPACK2 modules stack — The modules as received — silver extruded housings, black fan-end bezels, fins down the sides.

FLATPACK2 handle end — Handle end: the black grip, the grille over the fan path, and the LED window beside it.

Nameplates

FLATPACK2 label close-up — Label close-up: FLATPACK2 48/2000 HE, part 241115.105, Revision 2.3 with SW 01.13/01.12, AC Input 100–250Vac 45–66Hz 12.5Amax fuse 15A F, DC Output 53.5V/37.4A, S-No 115271146490, shelf tag PR2-Slot7, Made in China.

FLATPACK2 five labels — All five label panels in one frame — each module keeps its yellow shelf-position tag (PR1-Slot4, PR2-Slot6/7/8) from the rack it was pulled from.

FLATPACK2 front panel print — Front face: FLATPACK2 HE 48V/2000W print, fan grille, status LEDs and the green Eltek mark.

Video: the modules turned on the bench — face, label and heatsink side in turn.

Packaging and condition

FLATPACK2 in carton — The five in the foam-lined carton, four still in their bags.

FLATPACK2 five backs — Five label backs up — serials each distinct, condition clean.

FLATPACK2 rear faces — Rear faces of two modules — the label side with shelf tags.

FLATPACK2 rear row — Four modules rear-up in the tray.

FLATPACK2 heatsink sides — Heatsink sides: the extrusion fins are clean, no bent fins from shelf handling.

FLATPACK2 fin side — Fin side of one module — extrusion clean top to bottom.

FLATPACK2 rear detail — Connector end detail: the backplane edge and handle pivot.

FLATPACK2 rear up — Label faces up in the tray — one more view of the five.

FLATPACK2 standing row — The four bagged modules standing, one unpacked in front.

A note on the photo set

One archive shot showing a different power module (a card-edge unit with a 96-pin connector) came in with this record's list; it belongs to another delivery and is excluded here. All photos above show the actual FLATPACK2 modules.

Service notes

Flatpack2 modules hot-swap: pull the handle, slide out, slide the replacement in — the controller re-balances load share automatically. The SW 01.13 firmware in this Rev 2.3 batch talks to the standard Smartpack controllers; if your plant runs CAN addressing, set the module address after install. At 37.4 A per module, a four-module shelf carries roughly 150 A of 54 V bus with N+1 to spare.