IPPD-12V Hall Effect Pedal Accelerator: Advanced Speed Control for Industrial Automation
On this page
This Enpower pedal assembly is marked ipPD-12V and serial P2504037. The delivery record dated 4 December 2025 lists one new original unit, with a recorded weight of 1 kg. Nine photographs show the enclosure, splined shaft, separate pedal arm and four-contact cable connector. The clearest label also exposes a wiring-language discrepancy that matters when matching this unit to a controller.
Identification and delivery details
A black four-screw lid covers the silver metal housing. Slotted mounting feet project from the base, and a splined shaft extends through the sides. The detached metal pedal arm has a matching splined clamp opening and a small clamping screw. The photographs show the parts together, rather than an installed pedal with its travel adjusted.
The label reads Enpower, ipPD-12V, SN: P2504037 and www.in-powercar.com. A separate oval sticker repeats 12V. Its English wiring table prints RED: POWER+, BLACK: POWER-, YELLOW: SWITCH and BLUE: SIGNAL. The Chinese table instead assigns the signal to green, and green insulation is visible beside red, black and yellow at the connector cable. Both label versions are retained here; a colour-only connection instruction would conceal the conflict.
The lid warning says not to remove the cover if the battery-pack voltage is higher than 48 V. That warning is distinct from the unit's 12 V model marking. The photographs do not establish a Hall sensor specification, output-voltage span, enclosure protection rating or return-spring performance.
| Item | Evidence |
|---|---|
| Brand and model on unit | Enpower; ipPD-12V |
| Serial number | P2504037 |
| Voltage marking | 12V sticker; -12V model suffix |
| Power conductors on label | Red POWER+; black POWER- |
| Switch conductor on label | Yellow SWITCH |
| Signal discrepancy | English table: BLUE SIGNAL; Chinese table: green signal; green lead visible |
| Connector | White four-contact housing with latch and red internal insert |
| Mechanical arrangement | Splined shaft, detached clamp-on pedal arm, slotted mounting base |
| Recorded delivery | One unit; new original according to record; 4 December 2025 |
| Recorded weight | 1 kg; not a photographed scale measurement |
Swipe or scroll horizontally to read the full table.
Source: the photographed Enpower label, connector and mechanical views, together with the dated delivery record. Electrical output and sensor technology require the exact manufacturer's documentation.
Matching this part
Compare ipPD-12V, connector shape, terminal arrangement, shaft splines, arm orientation and base slots with the existing pedal. The separate arm means its clamp position and usable travel need checking against the host mechanism.
Obtain the exact controller wiring diagram and terminal confirmation before connecting the four leads. Resolve the blue/green signal discrepancy by terminal identification rather than choosing one language on the label. A replacement assessment should also include a powered signal sweep, switch operation and return action; these measurements are absent from the still photos.
Photos and recorded media
Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.
Related records and products
For a part comparison or current availability, use the KOEED contact page and include the complete pedal and controller identifiers.
Request this part
Send ipPD-12V, the controller model, connector and terminal photographs, mounting dimensions and quantity. Ask for confirmation of the signal terminal, condition and functional-test evidence with the quote.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
