OMIH-SS-112LM — source photograph

OMIH-SS-112LM: delivery record

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

The OMIH-SS-112LM source photographs show blue rectangular relay bodies with black undersides and projecting pins, followed by relays stored in transparent tubes. The record is dated 8 May 2025. The first two views document construction and packing, but the complete model and electrical ratings are not readable.

Identification and delivery details

The first photograph shows four projecting pins on the underside of one relay. Their positions and the shape of the black base can be compared with the existing board component. No pin dimensions or footprint measurements are supplied, so appearance alone does not establish a drop-in replacement.

The second view shows two transparent packing tubes containing rows of blue components. This is useful evidence of the packing format. The photograph does not provide a reliable count of the entire source lot or identify a manufacturer from a readable label.

The note describes the goods as new and original and records a weight of 2 kg. That condition description is attributed to the source; it is not an authentication conclusion. The weight is not verified as the net mass of one relay or a specific pack.

The title specifies 12 VDC and 16 A, and the earlier description names a legacy manufacturer. None of those claims is established by a legible case label in the reviewed views. Confirm the coil designation, contact arrangement and load-specific ratings on the actual offered part.

Eight source photographs are retained. No coil energisation, contact-resistance result or switching test is demonstrated by the reviewed images. A packing photograph cannot establish electrical life or operating performance.

Photographed markings and delivery record
Item Evidence
Source model OMIH-SS-112LM
Visible component Blue rectangular relay body with black underside
Visible pin format Four projecting pins on the reviewed underside
Packing observed Rows of components in transparent tubes
Electrical values in title 12 VDC and 16 A; not verified from reviewed labels
Source condition New and original, as recorded; provenance not authenticated
Recorded weight 2 kg; scope of weight not specified
Record date 8 May 2025

Swipe or scroll horizontally to read the full table.

Photographs 1 and 2 support the construction and packing observations. Model and condition come from the source. Brand and electrical configuration require clearer identification evidence.

Matching this part

Send a clear case marking and the full OMIH-SS-112LM suffix. Compare coil voltage, contact arrangement, body dimensions and board footprint using the actual part documentation. A four-pin appearance does not by itself confirm those details.

Specify the required quantity and packing format. Ask for photographs of the offered lot labels and any available check record, and confirm whether manufacturer traceability is needed. A ten-piece catalogue pack is not evidence of the size or provenance of this source lot.

Photos and recorded media

Blue rectangular relay with black underside and four projecting pins; adjacent component partly visible.
Blue rectangular relay with black underside and four projecting pins; adjacent component partly visible.
Rows of blue components inside two transparent packing tubes wrapped together.
Rows of blue components inside two transparent packing tubes wrapped together.
Source-record photograph 3 filed under OMIH-SS-112LM.
Source-record photograph 3 filed under OMIH-SS-112LM.
Source-record photograph 4 filed under OMIH-SS-112LM.
Source-record photograph 4 filed under OMIH-SS-112LM.
Source-record photograph 5 filed under OMIH-SS-112LM.
Source-record photograph 5 filed under OMIH-SS-112LM.
Source-record photograph 6 filed under OMIH-SS-112LM.
Source-record photograph 6 filed under OMIH-SS-112LM.
Source-record photograph 7 filed under OMIH-SS-112LM.
Source-record photograph 7 filed under OMIH-SS-112LM.
Source-record photograph 8 filed under OMIH-SS-112LM.
Source-record photograph 8 filed under OMIH-SS-112LM.

Use Koeed contact details to provide relay markings, board footprint dimensions and packing requirements.

Request this part

Request OMIH-SS-112LM with a readable original case label. Specify coil voltage, contact configuration, footprint, manufacturer requirements and the quantity and packing needed.

Need a quote for this part?

Send us the part number or article link — we will confirm price, availability and lead time.

WhatsApp us

Related Articles

Kembali ke blog