Omron CP1W-MAD44 Analog I/O Module: Comprehensive Guide for Industrial Automation
On this page
The 10 March 2026 supply entry records eight Omron CP1W-MAD44 analog I/O units, described as new with a one-year warranty. The photos show eight labelled boxes and one unpacked black module with screw terminals, an expansion ribbon cable and yellow rear mounting latch. Its label identifies an A/D D/A UNIT with four input points and four output points.
Identification and delivery details
The module face separates IN and OUT terminal legends. Each side identifies channels 1 through 4, with voltage, current and common terminals; the input side also labels AG. The side nameplate reads CP1W-MAD44, Lot No. 12Z25M YAX and MADE IN CHINA. A Kyoto, Japan company address is printed on the same label and does not change the manufacturing statement.
The voltage/current choices printed for both A/D and D/A are 1–5 V / 4–20 mA, 0–5 V / 0–20 mA, 0–10 V and −10 to +10 V. The label gives four points for each direction. These are selectable signal ranges, not a statement that one terminal simultaneously handles every range. The photographs show no configured program, calibration result or channel measurement. Box lots vary, including 21Y25M, 12Y25M and 12Z25M; they are retained as printed codes without deriving dates.
| Item | Evidence |
|---|---|
| Identity | Omron CP1W-MAD44 A/D D/A UNIT |
| Analog inputs | Four points; label signal ranges 1–5 V / 4–20 mA, 0–5 V / 0–20 mA, 0–10 V, −10 to +10 V |
| Analog outputs | Four points; label shows the same voltage/current range choices |
| Connections | Screw terminals with separate IN/OUT legends; attached expansion ribbon cable |
| Mounting | Black housing with yellow rear latch and mounting ears |
| Module lot and country | 12Z25M YAX; MADE IN CHINA; Japan company address separately stated |
| Quantity | Eight units recorded; eight boxes in group photo; one module shown unpacked |
| Condition and warranty | New; one year; 10 March 2026 |
| Record weight | 0.5 kg; not a photographed bare-module weighing |
Swipe or scroll horizontally to read the full table.
Model, signal ranges, channel counts and manufacturing statement come from the photographed unit label. The entry supplies quantity and warranty. Box security labels are visible but are not treated as an independent authenticity check.
Matching this part
Send the host PLC model, required analog ranges, wiring arrangement and available expansion capacity. Match CP1W-MAD44 in full and confirm the host's supported expansion configuration before choosing this unit.
Check each channel's voltage/current selection, common wiring and scaling against the exact unit instructions. Ask for agreed input/output measurements if accuracy determines acceptance; this delivery photo set contains no measured calibration data.
Photos and recorded media
Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.
Related records and products
See the separate Omron CP2E-N30DR-D supply record for a photographed compact controller. Host compatibility and expansion limits require checking independently. You can contact KOEED with your PLC configuration.
Request this part
Send CP1W-MAD44, the host PLC model, required signal ranges and quantity. Ask for available lot, condition, channel test evidence and written warranty terms.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
