Placeholder Output

The R2D250-RA10-15 source records an ebmpapst fan as one new original item. The reviewed photographs show loose lead contacts and a red impeller with a readable motor label. The same source gives both 3kg and 4kg, so neither weight is silently selected as the specification.

Identification and delivery details

The first photograph shows coloured leads extending from a black sheath, with metal contacts at their ends. A small part of the red fan is visible at the edge. No conductor function, finished connector pinout or wiring test is assigned from the lead colours.

The second photograph shows the red impeller around an ebmpapst R2D250-RA10-15 label carrying Made in Germany wording. The label gives paired 400/460V and 50/60Hz entries, 0.33/0.41A, 200/300W and 2500/2750min⁻¹. These are label ratings, rather than measured operating results.

The label also carries M2D068 EC motor wording and additional codes. A motor component identifier is not treated as the complete fan's revision. Small code markings are not decoded into a manufacturing date, and the visible directional features do not demonstrate powered rotation.

The note dated 12 November 2025 explicitly describes one item as new original, names ebmpapst and Germany, and gives a one-year warranty. Its first weight entry is 3kg, while a later entry in the same note says 4kg. The record does not explain whether either is net, packed or a corrected value.

All eight source photographs and the single source video were downloaded and retained. Only the first two photographs were visually reviewed; later photographs have neutral source captions. No witnessed airflow, speed, noise or insulation test is claimed, and the original-condition declaration is not independently authenticated.

The only product candidate uses COOLMAX branding and a generic R2D250-RA10 title, with several suffixes in its handle. That does not establish a match to this full ebmpapst -15 item, so no product link is attached. Match the complete label and mechanical interface for a replacement enquiry.

Swipe or scroll horizontally to read the full table.

The second photograph supplies the full ebmpapst model and Germany label wording. The source's 3kg and 4kg entries remain unresolved; the new-original and warranty declarations are historical statements rather than independent authentication or current terms.

Matching this part

Compare the full -15 nameplate, the applicable voltage/frequency rating pair, mounting dimensions and impeller clearances with the installed fan. Obtain the manufacturer's wiring instructions.

Confirm current condition, quantity, packing and warranty. Ask which weight applies and how it was measured before using it for freight or mounting decisions.

Photos and recorded media

Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.

Related records and products

For full-model and rating comparison, contact KOEED with the fan label and required mounting details.