Sample Output
On this page
The QV60-RGC1 record describes one used BOSCH item with a three-month warranty. Its front marking confirms QV60-RGC1, while the reviewed rear board carries a separate component number. The full source assembly identifier 0 811 405 104 is retained without replacing it with that board number.
Identification and delivery details
The first photograph shows a narrow BOSCH front panel marked QV60-RGC1. Indicator legends include ON, UB, Ramp off and Lvdt, with adjustment legends including max, zero and a five-second marking. Coloured indicator lenses in a photograph do not establish a powered operating state.
The second photograph shows the circuit-board underside, solder joints, tracks and a lower edge connector. A BOSCH QV60 label reads 1 813 300 065. This is a visible board identifier, not proof that the complete assembly bears the source's 0 811 405 104 identifier.
The note dated 9 March 2026 explicitly records one item, used condition and a three-month warranty; the record was created on 10 March 2026. Germany manufacture, 24V and 55VA are source declarations, with no complete rating plate visible in the first two views.
The numeric weight field is 0.5, without a unit or weighing scope in the note. No measured mass is asserted. The photographs do not establish service history, calibration status, prior repairs or a complete accessory package.
All six photographs and one clip are retained. Only the first two photographs were visually reviewed; later photographs carry neutral source captions. Front adjustment legends and board appearance do not constitute a tested control response.
No exact product candidate was found for QV60-RGC1 with the complete recorded assembly code. A replacement request should retain used grade and obtain the actual assembly label, board identifier and application requirements before deciding compatibility.
| Item | Evidence |
|---|---|
| Front manufacturer / model | BOSCH / QV60-RGC1 |
| Source assembly identifier | 0 811 405 104; not physically verified |
| Reviewed board identifier | 1 813 300 065 |
| Source electrical declarations | 24V / 55VA |
| Historical quantity / condition | One item / used |
| Historical warranty / origin | Three months / Germany, as recorded |
| Weight field | 0.5; unit and scope not specified in note |
| Source / creation dates | 9 March 2026 / 10 March 2026 |
Swipe or scroll horizontally to read the full table.
The front model agrees with QV60-RGC1. The separate board number is not substituted for the unverified full assembly identifier, and the explicit used grade is retained.
Matching this part
Provide the complete assembly rating plate and board identifier, revision information and the installed unit's application documentation. Resolve 0 811 405 104 versus the visible board label without assuming they are interchangeable identifiers.
Confirm present used condition, service/repair history, quantity, packing and warranty. Agree model-specific functional acceptance evidence for the required control application.
Photos and recorded media
Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.
Related records and products
Send the complete assembly label through the contact page.
Request this part
Retain the complete assembly identifier and disclosed used grade in the QV60-RGC1 enquiry.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
