KLÜBER to SKF Electric Motor Grease Cross-Reference
| KLÜBER Product | Equivalent | Notes |
| Kluberspeed BF 72-22 | SKF LGHP 2 | Both polyurea, synthetic. Kluberspeed optimized for low-noise; LGHP 2 has wider temperature range. |
| ISOFLEX TOPAS NB 52 | SKF LGHP 2 | Barium complex vs polyurea. ISOFLEX for high-speed motor bearings; LGHP 2 for standard motors. |
| Kluberplex BEM 41-132 | SKF LGMT 2 | Both lithium mineral. For standard motors at moderate speeds (1800 RPM and below). |
| Klüberspeed BF 72-22 | SKF LGLT 2 | Both low-torque synthetic for high-speed and low-temperature motor bearings. |
Reference: Published product datasheets. Verify with current datasheets before substitution.
⚠ Important Disclaimer
This cross-reference is provided for informational purposes only. Equivalent does not mean identical. Always verify technical compatibility by consulting both manufacturers' datasheets and obtaining OEM approval before substituting. Contact KOEED for verified KLÜBER product recommendations.
Frequently Asked Questions
Q: How often should electric motor bearings be regreased?
Relubrication frequency depends on motor speed, bearing size, operating temperature, and environment. NEMA frame motors at 1800 RPM in clean, moderate-temperature environments: typically 6-12 months. 3600 RPM motors or motors in hot/dirty environments: 3-6 months. Use condition monitoring (ultrasound, vibration, temperature) to optimize intervals rather than relying solely on calendar-based schedules.