SJ12AG: delivery record

21 settembre 2026

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

The SJ12AG record dated 11 June 2026 explicitly describes three Fuji SJ-0G contactors, DC24V, Japan, 0.5 kg and a one-year warranty, with new and original wording. The reviewed unit label shows SJ-0G and SJ12AG together, while the second photograph shows three bagged contactors. The coil voltage remains a source statement because its separate marking is not visible.

Identification and delivery details

Photograph 1 shows the side label through a plastic bag. It reads SJ-0G, SJ12AG, Fuji Electric FA and Made in Japan, with AC-1 Ith=15A, Ui=500V and Continuous current 15A. These contact and insulation markings are not the coil voltage or measured switching results.

Photograph 2 was reviewed to check the source quantity and assembly. It shows three individually bagged contactors with the same base identity. Bagging does not independently establish original manufacturer packing, sealed condition or complete accessories.

The manual DC24V statement is kept separate from the contact label’s AC-1 and Ui ratings. A DC24V coil label, full auxiliary-contact configuration and 13NO or NC designation are not established in these first two views. A nearby SJ-0GRM model is not adopted as this unit.

The three-piece count is explicit in the manual note and agrees with the observed three assemblies. The close-up is not counted as a fourth contactor. Source new and original wording and the manufacturer logo do not independently authenticate the units or demonstrate contact operation.

The 0.5 kg source weight has no per-unit, three-unit or packed basis. The one-year warranty is historical, and no coil actuation, contact-resistance, switching endurance or installed acceptance test is recorded. Replacement needs the complete unit configuration and current written conditions.

Photographed markings and delivery record
Item	Evidence
Source / visible complete identity	Fuji SJ12AG / SJ-0G contactor
Historical date / explicit quantity	11 June 2026 / three units
Source condition / originality	New with an originality claim; not independently authenticated
Source / label origin	Japan / Made in Japan
Source coil voltage	DC24V; separate coil marking not seen
Visible contact label	AC-1 Ith=15A / Continuous current 15A
Visible insulation label	Ui=500V; not coil voltage
Source weight / warranty	0.5 kg, basis unspecified / one year, current terms unconfirmed
Observed packing	Three individually bagged assemblies; complete contents unverified
Auxiliary contacts / coil / revision	Not fully established
Coil / contact / replacement acceptance	No documented test

Swipe or scroll horizontally to read the full table.

All eight unique source photographs were downloaded and checked for bytes and SHA; the source contains no video. Photographs 1 and 2 were reviewed, and the other six have neutral source captions. The label close-up and three-unit view do not make four supplied contactors.

Matching this part

No product link is selected. The full-model listing adds an unverified 13NO detail, other entries specify NC or SJ-0GRM, and the remaining base-model entries do not establish the complete source configuration, grade and packing.

Request full current side and coil labels, exact contact configuration, provenance, contents and recorded actuation/contact acceptance results. Confirm the DC24V assembly, current quantity, 0.5 kg basis and written warranty without inferring compatibility from a nearby model.