OP12DA040EE: delivery record
On this page
The OP12DA040EE source identifies a low-pressure sensor for Carrier 30HXC equipment. The first two photographs show a bagged brass-coloured fitting with a black electrical connector housing and an internally threaded pressure-port opening. They do not verify the complete part marking or pressure range.
Identification and delivery details
The side view shows a short metal body and a black connector housing with a latch feature. No clear manufacturer label or full OP12DA040EE designation can be read through the bag in that view. The source’s application statement is therefore kept separate from physical manufacturer identification.
The second photograph looks into the metal port. Internal threads and a central feature are visible, but no scale or thread specification is provided. Check the exact thread, seat and sealing arrangement against the existing sensor; a similar-looking port is not enough to confirm fit.
The note dated 15 June 2026 describes new goods with a one-year warranty. It records 0.5 kg without a defined weight scope. Those details are source information and should be confirmed for the actual offered unit.
The EE suffix is part of the source model. It has not been shortened to OP12DA040 or treated as proof of equivalence with that designation. The required low-pressure range, output, supply and connector contacts need confirmation from the unit label and applicable documentation.
Seven photographs are retained and no video is listed in this source. No pressure measurement, calibration result or installed operation is established by the two reviewed images. The record does not provide an equipment-specific acceptance test.
| Item | Evidence |
|---|---|
| Source model | OP12DA040EE; retain EE suffix |
| Source application | Low-pressure sensor for Carrier 30HXC equipment |
| Visible housing | Brass-coloured metal body and black latched connector housing |
| Visible pressure port | Internally threaded opening; dimensions and sealing specification unverified |
| Readable manufacturer label | Not confirmed in the first two photographs |
| Source condition and warranty | New; one year, subject to offered-unit confirmation |
| Recorded weight | 0.5 kg; weight scope unspecified |
| Record date | 15 June 2026 |
Swipe or scroll horizontally to read the full table.
Photographs 1 and 2 document the housing and port. Full model and application come from the delivery note; manufacturer identity and pressure/electrical configuration remain unverified.
Matching this part
Provide the complete existing sensor label and host equipment identification. Quote OP12DA040EE with the suffix intact and compare the required pressure range, output and supply with the offered-unit markings.
Send connector-face and pressure-port photographs with the required fitting dimensions. Ask for actual manufacturer identification, condition and any supplied check record. This source application wording does not establish that a particular offered sensor is an original Carrier part.
Photos and recorded media
Related records and products
Compare the separate OP12DA040 record when checking nomenclature. It lacks the EE suffix and is not established as an interchangeable configuration.
Request this part
Request OP12DA040EE and include the equipment model, complete existing label, required pressure and electrical values, connector details and port specification.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
