SC50X175: delivery record

2026년 9월 11일

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

The SC50X175 entry records two new AirTac cylinders on 29 May 2026, with a stated weight of 3 kg and a one-year warranty. The first two photographs show wrapped cylinder end details and a protected rod end. The full model is stated in the supply note, but no complete label is readable in these two views.

Identification and delivery details

The first photograph is a close view of a dark square end face under clear wrapping, with corner holes and metal rods extending behind it. A packaging label in the background is too blurred for a dependable complete transcription. This view records the physical end shape rather than verifying the entire model or measured dimensions.

The second photograph was needed to seek additional identity detail. It shows the wrapped rod-side end, a metal rod with a hexagonal nut and a blue protective cap, with another wrapped end in the background. It does not supply a readable full model or manufacturer plate.

The source explicitly names AirTac Cylinder and SC50X175. That complete source identity supports a catalogue match, while the photographs remain limited to the visible form. The model’s numbers are not presented as independently measured bore and stroke, and no port-size, sensor, seal or mounting variant is inferred.

The two-piece quantity and new condition are historical source descriptions. The 3 kg figure has no stated per-cylinder or combined basis. The one-year warranty requires current agreement; country of manufacture, complete retail packing and included fittings are not established in the note. No pressure, leakage, travel or cycle-life test result is documented.

Photographed markings and delivery record
Item	Evidence
Source manufacturer / model	AirTac / SC50X175
Historical entry	29 May 2026
Source quantity / condition	Two pieces; new
Source weight	3 kg; unit or group basis not stated
Source warranty	One year; historical term
Reviewed first view	Wrapped square end face with corner holes and metal rods
Reviewed second view	Rod-side end, hex nut and blue protective cap
Complete photographed label	Not readable in the reviewed views
Measured bore / stroke	Not established; model code is a source identifier
Origin / fittings / full packing	Not established
Operating evidence	No pressure, leakage or travel result established

Swipe or scroll horizontally to read the full table.

All twelve unique source photographs are retained with their filename mapping and byte/SHA checks. The source contains no video. Photograph 1 was reviewed for the end form; photograph 2 was needed to seek identification but shows the rod-side detail without a full readable label. The other ten photographs carry neutral source captions.

Matching this part

The AirTAC SC50X175 cylinder offer matches the complete manufacturer, model and cylinder category explicitly stated in the manual supply note. Its real Product gid, handle, ACTIVE status and storefront URL were verified. This is a match to the source-stated model, not independent authentication of the wrapped units or a reading of their complete labels.

The linked offer describes a single cylinder, while the historical note records two pieces. Specify the current quantity and complete model, then confirm actual labels, mounting details, condition, included parts, packing and warranty in the quotation. The earlier entry does not establish present stock or an operating result.