KLÜBER to Shell High-Temperature Grease Cross-Reference Table
| KLÜBER Product | Equivalent Product | Compatibility & Notes |
| Kluberlub BE 71-501 | Shell Gadus S5 V220 2 | Bentonite vs lithium complex. BE 71-501 rated to 200°C continuous vs S5 V220 to 180°C. |
| Barrierta L 55/2 | Shell Gadus S5 V220 2 | PFPE/PTFE vs lithium complex — not equivalent. Barrierta L rated to 260°C. Shell has no PFPE grease. |
| PETAMO GHY 441 | Shell Gadus S3 V460D 2 | Both lithium complex. PETAMO continuous 180°C (peaks to 200°C). Gadus S3 rated to 160°C. |
| UNISILKON L 250 L | Shell Gadus S5 V100 2 | Silicone vs lithium complex — different thickener types. UNISILKON for low-load high-temp to 200°C. |
| Klübertemp HM 83-402 | Shell Gadus S5 V220 2 | PTFE/silicone vs lithium complex. Klübertemp rated to 220°C for low-load oven chain applications. |
| ALTEMP Q NB 50 | Shell Gadus S5 V220 2 | PFPE/PTFE vs lithium complex — not equivalent. ALTEMP Q for extreme temps + chemical resistance. No Shell PFPE equivalent. |
Reference: Published product datasheets from KLÜBER Lubrication and Shell. Verify with current datasheets before substitution.
⚠ Important Disclaimer
This cross-reference is provided for informational purposes only. Equivalent does not mean identical — differences in thickener type, base oil viscosity, additive packages, and NLGI grade can affect performance. Always verify technical compatibility by consulting both manufacturers' datasheets and obtaining OEM approval before substituting lubricants. Contact KOEED for verified KLÜBER product recommendations matched to your specific application requirements.
> Tip
When cross-referencing, always verify: (1) thickener compatibility — mixing incompatible thickeners can cause grease to soften or harden, (2) base oil viscosity at operating temperature, (3) NLGI grade for proper consistency, (4) certification status (NSF H1, ISO 21469) for food-grade applications. If in doubt, contact KOEED for a verified recommendation.
Frequently Asked Questions
Q: What is the maximum temperature rating for Shell Gadus greases?
Shell Gadus S5 V220 (synthetic) has a maximum continuous operating temperature of approximately 180°C. For applications above 180°C, KLÜBER offers bentonite-thickened (Kluberlub BE 71-501, to 200°C) and PFPE/PTFE greases (Barrierta L, to 260°C) that exceed Shell's temperature capability.
Q: Does Shell offer a PFPE-based high-temperature grease?
No. Shell's grease portfolio does not include PFPE (perfluoropolyether) based products. For applications requiring PFPE greases — temperatures above 220°C, vacuum environments, aggressive chemical exposure, or oxygen service — KLÜBER Barrierta L and ALTEMP Q series are the relevant specifications.