Danfoss KP36 Pressure Controller: Comprehensive Guide for Industrial Automation Applications

The Danfoss KP36 record documents four pressure controls supplied on October 15, 2025. A reviewed enclosure label lists separate AC-1, AC-15, AC-3 and DC-13 contact ratings. These describe different load categories and must be compared with the actual switched circuit before choosing a replacement.

Identification and delivery details

The supply note describes four new, original units with a three-month warranty, Indian manufacture and a 2 kg weight entry. The second photograph shows four controls together, consistent with that recorded quantity. The weight entry does not state whether it covers the group, one unit or packing.

The first label reads AC1 16 A at 400 V, AC15 10 A at 400 V, AC3 16 A at 400 V, DC13 12 W at 220 V and LR 112 A at 400 V. The DC-13 figure is expressed in watts, and the LR figure is separately marked; neither should be rewritten as a general continuous-current rating.

Danfoss addresses in Denmark and the UK appear on the label. They identify company locations and do not override the note's India origin entry. The source description gives a 1 to 10.5 bar range, but the first two photographs do not provide a readable pressure-range or complete KP36 variant label.

Swipe or scroll horizontally to read the full table.

Photographs 1 and 2 were reviewed; six other photographs and one video remain source media without individual visual review. No pressure switching, contact endurance or calibration measurement is documented.

Matching this part

Identify the full KP36 variant on the installed unit, then confirm the range, differential, pressure connection and reset behavior from its documentation. The family name and a common enclosure do not settle those details.

Select contact ratings by utilization category and the actual circuit voltage. Check mounting-hole positions, the pressure-fitting seal and cable entry separately. Request readable current labels where the archived views leave identification incomplete.

Photos and recorded media

Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.

Related records and products

The KP2 060-112066 delivery records a separate low-pressure control with its own range and connection. It does not establish KP36 interchangeability. Provide the installed labels through Contact us.