MRS20-DUL: delivery record

8. juli 2026

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

The MRS20-DUL record identifies two new ORIX cooling fans with a one-year warranty on 16 January 2026. The first reviewed photograph shows an ORIX-marked fan whose centre label identifies MRS20-DUL; the second is another oblique view of the frame and blades.

Identification and delivery details

The photographed label includes an AC 200/230 V marking, while the source note specifically states 200 V, 0.5 A and two-wire construction. Small frequency/current lines are not confidently read in these two views, so the 0.5 A and wire-count details are attributed to the source.

The views show a square black frame, corner mounting holes, blades and an attached cable. The source's two-unit quantity is not increased by other fan portions visible at the picture edge.

The 3 kg weight appears in both the record field and note, but its unit/packing basis is unstated. No measured airflow, dimensions, sound level or operating test is established. The old description's 466 CFM and 200 x 200 x 90 mm claims are not adopted without independent specification evidence.

Photographed markings and delivery record
Item	Evidence
Photographed model/brand	MRS20-DUL; ORIX
Visible voltage marking	AC 200/230 V
Source electrical detail	200 V, 0.5 A; two-wire
Source quantity/condition	Two new fans
Source warranty/date	One year; 16 January 2026
Source weight	3 kg, basis unspecified
Visible construction	Square frame, mounting holes, blades and cable
Unverified	Frequency/current label details, dimensions, airflow and powered test

Swipe or scroll horizontally to read the full table.

Thirteen photographs and one MP4 completed GET download and byte/SHA-256 checks. Only photographs 1 and 2 were reviewed; eleven photographs retain neutral source captions.

Matching this part

Request the complete MRS20-DUL label and the required supply/frequency, frame dimensions, mounting pattern and airflow direction. Confirm the two-wire termination for the installed equipment.

Confirm quantity and warranty terms and request a powered inspection or airflow report as needed. Catalogue descriptions do not identify or test the particular units in this source.

Photos and recorded media

Reviewed photograph 1: ORIX MRS20-DUL-labelled black axial fan with blades, corner mounting holes and cable; label viewed obliquely.

Reviewed photograph 2: another oblique view of the black fan frame and blades; small label lines not confidently legible.

Source-record photograph 3 filed under MRS20-DUL.

Source-record photograph 4 filed under MRS20-DUL.

Source-record photograph 5 filed under MRS20-DUL.

Source-record photograph 6 filed under MRS20-DUL.

Source-record photograph 7 filed under MRS20-DUL.

Source-record photograph 8 filed under MRS20-DUL.

Source-record photograph 9 filed under MRS20-DUL.

Source-record photograph 10 filed under MRS20-DUL.

Source-record photograph 11 filed under MRS20-DUL.

Source-record photograph 12 filed under MRS20-DUL.

Source-record photograph 13 filed under MRS20-DUL.

Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.

View the ORIX MRS20-DUL Axial flow fan 200v 0.5A 2-wire catalogue listing. Confirm the exact configuration and condition; a catalogue entry does not identify this delivered unit. Compare the distinct MR18-DC source record, whose imitation provenance and label conflict are documented separately.