Sample Output

12. oktober 2026

Pre-shipment Inspection Record: This document details the visual and technical inspection of the Sample Output. All product photos and testing videos below are original materials captured first-hand by the Koeed technical team in our warehouse prior to dispatch.

The R3G500-AG25-61 record shows a large fan assembly packed in a carton with a clear bag and foam corner supports. The second photograph provides an ebmpapst nameplate specifying three-phase 380–480VAC. This differs from the source note's 380–480VDC wording, which is retained as a source discrepancy.

Identification and delivery details

The first photograph shows the silver assembly in its carton, with a finned motor/electronics housing, capped cable entries and clear wrapping. Foam and folded cardboard support the corners. That view describes the packing present, without proving original sealed packing or a complete accessory set.

The second photograph shows ebmpapst R3G500-AG25-61 and Made in Germany wording. Its electrical line reads 3~ 380–480VAC, 50/60Hz, with 3.9A and 2500W at 400V, 1700min⁻¹ and IP20. These are nameplate values, not witnessed operating measurements.

The source entry created on 28 July 2025 records 380–480VDC and 50/60Hz. The visible AC and three-phase marking takes precedence for this photographed assembly, while the written DC entry is disclosed rather than silently corrected or used as a connection instruction.

The label also carries VSD integrated wording, a motor-family code and warning markings. No external control protocol, functional drive test, complete installation procedure or revision is inferred. Small code/date-like markings are not decoded into a manufacturing date.

The source does not explicitly state quantity, condition or warranty duration. Its weight field is zero and supplies no usable weighing evidence. Visible carton packing alone does not establish that the assembly is new or currently available.

All six source photographs and the MOV clip were downloaded and retained. Only photographs one and two were visually reviewed; later photographs have neutral source captions. No complete-model product candidate was found, so the article does not link to a neighbouring model or suffix.

Photographed markings and delivery record
Item	Evidence
Visible brand / full identifier	ebmpapst / R3G500-AG25-61
Physical supply marking	3~ 380–480VAC; 50/60Hz
Source supply discrepancy	380–480VDC in note; differs from AC nameplate
Label current / power / speed	3.9A; 2500W at 400V; 1700min⁻¹
Label origin / protection wording	Made in Germany / IP20
Visible packing	Clear bag, carton, foam and cardboard corner supports
Quantity / condition / warranty / weight	Not established by source declarations; zero weight field unusable
Record date	28 July 2025

Swipe or scroll horizontally to read the full table.

The photographed label specifies three-phase AC, while the source note says DC. Both are disclosed and the physical marking governs the description. Carton packing does not authenticate condition, and a zero weight field is not a valid item weight.

Matching this part

Compare the complete model and actual AC nameplate against the machine requirements. Obtain the manufacturer's electrical, control and mounting documentation for this exact assembly.

Confirm current quantity, condition, packing contents and warranty. Request a measured weight and appropriate acceptance evidence for the offered unit.