KLÜBER to Shell Hydraulic Oil Cross-Reference Table
| KLÜBER Product | Equivalent Product | Compatibility & Notes |
| Klubersynth CH 2-100 | Shell Tellus S2 MX 46 | CH 2 is NSF H1 food-grade PAO hydraulic oil. Tellus S2 MX is mineral oil — verify food-grade requirements. |
| Klubersynth CH 2-68 | Shell Tellus S2 VX 32 | Different viscosity grades and base oil types. Verify system viscosity and cleanliness requirements. |
| Klubersynth UH1 6-100 | Shell Naturelle HF-E 46 | Both NSF H1 synthetic hydraulic oils. Different base oils (PAO vs ester). Verify seal compatibility. |
| Klubersynth GEM 4-68 N | Shell Tellus S4 ME 68 | Synthetic gear/hydraulic oil. Tellus S4 ME is mineral-based high-VI oil. Different base oil technology. |
Reference: Published product datasheets from KLÜBER Lubrication and Shell. Verify with current datasheets before substitution.
⚠ Important Disclaimer
This cross-reference is provided for informational purposes only. Equivalent does not mean identical — differences in thickener type, base oil viscosity, additive packages, and NLGI grade can affect performance. Always verify technical compatibility by consulting both manufacturers' datasheets and obtaining OEM approval before substituting lubricants. Contact KOEED for verified KLÜBER product recommendations matched to your specific application requirements.
> Tip
When cross-referencing, always verify: (1) thickener compatibility — mixing incompatible thickeners can cause grease to soften or harden, (2) base oil viscosity at operating temperature, (3) NLGI grade for proper consistency, (4) certification status (NSF H1, ISO 21469) for food-grade applications. If in doubt, contact KOEED for a verified recommendation.
Frequently Asked Questions
Q: Can I use a mineral hydraulic oil where Klubersynth CH 2 is specified?
Klubersynth CH 2 is an NSF H1 food-grade PAO synthetic oil. If the application requires food-grade certification, a mineral oil (even Tellus S2) is NOT an acceptable substitute because it lacks NSF H1 registration. For non-food-grade applications, Shell Tellus S2 MX or S3 M may be functionally similar but verify viscosity, pump wear protection, and oxidation stability requirements.