Amada HFE Press Brake: Advanced Bending Technology for Precision Manufacturing
On this page
What is this Amada HFE panel part?
One clarification up front: although the listing title says "Press Brake," the photographed goods are the operator-panel parts for an Amada HFE-series CNC press brake — the printed membrane overlay (the fascia with all the key graphics) plus its green 25-way FPC tail cable, not the machine and not tooling. The overlay is the real thing: black polyester with the AMADA logo in the top corner, a large screened display window, the mode-selector and jog dial cut-outs with the yellow emergency-ring recess, the numeric keypad (0–9 with decimal and minus), the arrow cluster with FIN/END, the INS/DEL/MIR keys, the +/- keys, the green START and red STOP pads, and the machine pictograms (mode selector, foot-pedal icons, power symbol) printed between the cut-outs. Its back carries the full 3M adhesive liner and the green 25-conductor tail with black stiffener, labelled R25-10-14 OK on a white code sticker. The seller's Chinese notice on the liner reads, in effect: test-fit before sticking — once adhered, this film is out of warranty. New, unused, with the protective film still on the face; it was recorded at the Koeed warehouse on 16 October 2025, and the thirteen photos and video below show it as received.
Part details
| Field | Value |
|---|---|
| Application | Amada HFE-series CNC press brake operator panel (facia membrane + tail cable) |
| Overlay | Black polyester membrane, 3M adhesive liner, display window, dial cut-outs, yellow emergency-ring recess, AMADA logo |
| Printed keys | Numeric 0–9 with ./−, arrow cluster with FIN/END, INS / DEL / MIR, +/blank/−, green START, red STOP, power symbol, machine pictograms |
| Tail cable | Green 25-conductor FPC with black stiffeners both ends; white code sticker R25-10-14 OK; Amada print visible in the laminate |
| Seller notice | Chinese liner note: test-fit before adhering — no warranty once stuck; tearing voids warranty (撕毁不保) |
| Quantity | 1 overlay with its tail cable |
| Condition | New, unused, face film intact (per intake record) |
| Weight | Parcel listed at about 5 kg volumetric / 1 kg net (record) |
| Intake recorded | 16 October 2025 |
Fitting notes
A membrane overlay is a peel-and-stick renewal for a worn operator panel: strip the old fascia, clean the panel face, then align the display window and the dial cut-outs before committing the 3M adhesive — the seller's own note says test-fit first, because once it sticks there is no re-lift. Route the 25-way tail to the panel's FPC connector with the stiffener end into the latch, and keep the tail's natural bend — do not crease it at the root. The tail's code (R25-10-14) is the reference to match when checking your old cable; the overlay's graphics match the HFE panel layout photo-for-photo, so key positions line up with the machine's original legends.
Photos and video
All images below are original warehouse photos of the exact parts covered by this record, taken before dispatch. Click any photo to view it full size.
Sourcing help
KOEED supplies Amada machine panel parts and membrane overlays, in active and EOL stock. Send the part number for a quote.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
