2025/10/21 655-500-116, Sales records with pictures and video

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

What is the DF655-500-116 rotary union?

The DF655-500-116 is a domestically made (Chinese) rotating union built to the Deublin 655-500-116 pattern: a brass-bodied single-passage union that feeds coolant or water into a rotating spindle, roll or table while the shaft turns. The brass body is engraved MODEL:DF655-500-116 with the maker's line — Tengzhou Rongtai Machinery (滕州荣泰机械), Shandong — and the production date 2025-10; the NPT-threaded inlet elbow sits at one end, the polished steel rotor with its protective plastic sleeve at the other. The support bearing inside is an NSK 6013Z (marked JAPAN on the race). This record covers one new union; the intake record lists it at 8 kg with a one-year warranty. It passed through the Koeed warehouse on 21 October 2025; the photos and video below show it as received.

2 min readContent reviewed

Part details

DF655-500-116 rotary union (Chinese replacement), as recorded at intake
Field Value
Pattern Deublin 655-500-116 (domestic replacement, body engraved DF655-500-116)
Maker Tengzhou Rongtai Machinery, Shandong, China — DATE 2025-10 (engraving)
Type Single-passage rotating union, brass body
Bearing NSK 6013Z support bearing (JAPAN marked race)
Ports NPT threaded inlet elbow; threaded rotor port (plastic-sleeved)
Condition New
Recorded weight 8 kg
Warranty note One year per intake record
Intake recorded 21 October 2025
Scroll sideways to see the full table.

Fitting notes

Because this is a domestic replacement for a Deublin catalog number, check the mounting thread and rotor thread against your old union before ordering — dimensions follow the pattern but tolerances can differ slightly. Fit with a wrench on the hex flats, keep the plastic sleeve on the rotor until the mating coupling is ready, and hand-spin the rotor after mounting: it should turn freely with no gritty spots. First-run check is a paper-towel wrap at the seal face after ten minutes of rotation — a damp towel is normal bedding-in, a drip is not.

Photos and video

All images below are original warehouse photos of the exact unit covered by this record, taken before dispatch. Click any photo to view it full size.

NPT inlet elbow with spring visible
Inlet elbow: NPT thread with the internal spring and seal stack visible inside.
DF655-500-116 full body three-section view
Full body: brass three-section construction, NPT elbow left, steel rotor with plastic sleeve right.
NSK 6013Z bearing with plastic sleeve on rotor
Rotor end: NSK 6013Z support bearing (JAPAN on the race) and the rotor protected by its plastic sleeve.
DF655-500-116 engraving with Tengzhou Rongtai maker line
Body engraving: MODEL:DF655-500-116, TEL, DATE:2025-10, maker 滕州荣泰机械 (Tengzhou Rongtai Machinery); grease nipple beside.
Inspection video of this DF655-500-116 union, recorded at the Koeed warehouse on 21 October 2025.

Sourcing help

KOEED supplies rotating unions — genuine Deublin and domestic replacements — in active and EOL stock. Send the part number for a quote.

Need a quote for this part?

Send us the part number or article link — we will confirm price, availability and lead time.

WhatsApp us

Related Articles

Voltar para o blog