KLÜBER to Shell Bearing Grease Cross-Reference Table
| KLÜBER Product | Equivalent Product | Compatibility & Notes |
| Kluberplex BEM 41-132 | Shell Gadus S2 V220 2 | Both lithium, NLGI 2, mineral oil. General purpose bearing grease. Verify base oil viscosity. |
| Staburags NBU 12 | Shell Gadus S3 V220C 2 | Different thickener (barium vs lithium complex). NBU 12 has MoS₂ and superior water resistance. |
| Staburags NBU 8 EP | Shell Gadus S3 V460D 2 | NBU 8 EP has MoS₂ and barium complex. Gadus S3 V460D uses lithium complex with higher base oil viscosity. |
| Kluberspeed BF 72-22 | Shell Gadus S2 V100 2 | Both polyurea thickener, similar electric motor bearing applications. Verify speed rating. |
| ISOFLEX TOPAS NB 52 | Shell Gadus S5 V100 2 | Different thickener (barium vs lithium complex). ISOFLEX TOPAS rated to 2M DN vs S5 V100 rated lower. |
| ISOFLEX NBU 15 | Shell Gadus S2 V220 1 | Different thickener and NLGI. NBU 15 uses ester base oil for low-temp. Verify low-temperature requirements. |
| Kluberplex BEM 41-141 | Shell Gadus S2 V220AD 2 | Both lithium complex with enhanced EP for wet/dusty environments. |
| PETAMO GHY 441 | Shell Gadus S3 V460D 2 | Both lithium complex for high-temperature, heavy-load bearings. PETAMO has higher continuous temperature rating. |
| Klüberfood NH1 94-301 | Shell Gadus S4 FM 2 | Both NSF H1, aluminum complex thickener. KLÜBER adds ISO 21469 + Kosher/Halal certifications. |
| Kluberlub BE 71-501 | Shell Gadus S5 V220 2 | Different thickener (bentonite vs lithium complex). BE 71-501 rated to 200°C vs S5 V220 rated to 180°C. |
Reference: Published product datasheets from KLÜBER Lubrication and Shell. Verify with current datasheets before substitution.
⚠ Important Disclaimer
This cross-reference is provided for informational purposes only. Equivalent does not mean identical — differences in thickener type, base oil viscosity, additive packages, and NLGI grade can affect performance. Always verify technical compatibility by consulting both manufacturers' datasheets and obtaining OEM approval before substituting lubricants. Contact KOEED for verified KLÜBER product recommendations matched to your specific application requirements.
> Tip
When cross-referencing, always verify: (1) thickener compatibility — mixing incompatible thickeners can cause grease to soften or harden, (2) base oil viscosity at operating temperature, (3) NLGI grade for proper consistency, (4) certification status (NSF H1, ISO 21469) for food-grade applications. If in doubt, contact KOEED for a verified recommendation.
Frequently Asked Questions
Q: Can I use Shell Gadus S2 V220 as a direct replacement for Kluberplex BEM 41-132?
They are functionally similar — both lithium, NLGI 2, mineral oil greases for general industrial bearing applications. However, they are not identical: base oil viscosity, additive packages, and manufacturing quality differ. For non-critical applications, they can be considered functionally interchangeable with bearing temperature monitoring. For critical or OEM-specified applications, verify compatibility before substituting.
Q: Does Shell have a barium complex grease equivalent to KLÜBER Staburags NBU?
No. Shell does not offer barium complex greases. The Gadus S3 series uses lithium complex thickeners with EP additives. For applications requiring barium complex water displacement and salt water corrosion protection (steel mills, marine environments), KLÜBER Staburags NBU has no direct Shell equivalent and should be retained or upgraded to the KLÜBER product.
Q: What is the Shell equivalent of ISOFLEX TOPAS NB 52?
There is no direct equivalent. Shell Gadus S5 V100 is the closest alternative — both are synthetic, high-performance greases — but S5 V100 uses lithium complex thickener versus ISOFLEX TOPAS's barium complex. The barium complex provides superior mechanical stability at DN values above 1 million mm·rpm. For ultra-high-speed spindles, ISOFLEX TOPAS NB 52 is the recommended specification.