II5737 Inductive Sensor: Complete Technical Guide and Application Overview
On this page
Three new ifm II5737 inductive sensors are recorded on 5 February 2026 and shown with their boxes, fixed cables and mounting nuts. The full type on both box and body is IIA2010-FRKG/PH. The body label prints a 10 mm sensing range, 10–55 VDC, Imax 400 mA, IP67 and a fuse requirement of less than 1 A.
Identification and delivery details
The photo set includes a three-unit overview and close views of one sensor from both sides. Each unit has a broad threaded metal barrel with an orange flat sensing face and a black fixed cable ending in brown and blue conductors. The black rear sleeve contains the electrical markings, two alternative connection drawings, a yellow indicator window and Made in Germany wording. Three boxes carry the same II5737 / IIA2010-FRKG/PH identification and the printed code T AC 1303 002.
The diagrams show the two-wire brown/blue arrangement in two configurations. They provide a physical connection reference; they do not show a menu, software or a programming interface. The delivery note calls the goods new. Small scuffs are visible around the bottom edge of the photographed black sleeve, so the images are retained for condition assessment rather than described as cosmetically perfect.
| Item | Evidence |
|---|---|
| Identity | II5737; IIA2010-FRKG/PH |
| Body ratings | S 10 mm; U 10–55 VDC; Imax 400 mA |
| Protection marking | IP67; fuse <1 A; double-square symbol |
| Connections shown | Fixed two-conductor cable, brown and blue; two alternative drawings printed on sleeve |
| Physical details | Threaded metal barrel, orange flat end face, yellow indicator window, two mounting nuts |
| Origin and box code | Made in Germany; T AC 1303 002 on boxes |
| Lot | Three units described as new; recorded 5 February 2026 |
| Recorded weight | 0.5 kg; not a measured individual sensor mass |
Swipe or scroll horizontally to read the full table.
Source: the photographed II5737 body labels, three box labels and the dated delivery record. The ratings are transcribed from the actual goods; no switching test or precision measurement is documented.
Matching this part
For a replacement enquiry, include II5737 and IIA2010-FRKG/PH, the existing wiring arrangement, barrel dimensions and required target gap. Confirm the intended connection mode from the applicable original instructions; the two diagrams should not be treated as a three-wire output pinout.
The printed 10 mm range belongs to this sensor type. A nominal sensing distance does not establish the gap for every target material or installation. The photographs show the original cable ends and hardware, making those details useful for comparing an offered replacement.
Photos and recorded media
Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.
Related records and products
Compare the IG0012 AC/DC sensor record and the IFS201 low-voltage sensor record. Their ratings and wiring differ; the model families are not interchangeable on the strength of similar metal barrels.
Request this part
Send II5737 / IIA2010-FRKG/PH, quantity, existing cable connections and a mounting photo. We can check offered stock, visible condition and the exact variant before quoting.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
