Omron CP2E-N30DR-D Programmable Controller: Comprehensive Guide to Compact PLC Solutions
On this page
The 10 March 2026 entry records ten Omron CP2E-N30DR-D compact controllers, described as new with a one-year warranty. The group photo shows ten labelled boxes. One unpacked controller is photographed from the front, back and sides, including its two Ethernet sockets and a readable electrical nameplate.
Identification and delivery details
The controller and box labels both identify CP2E-N30DR-D, Ver. 1.0, lot 14X25M and MADE IN CHINA. The Kyoto, Japan company address is a separate label statement. Front terminal legends identify 18 input points across two groups and 12 output points across two groups. The supply marking is 24 V DC, 20 W, with a SELV source requirement; 20 W is controller consumption, not output contact capacity.
The nameplate separates input currents of 7.6 mA for ten points and 5 mA for eight points. Its output ratings distinguish resistive/general loads from pilot duty: 24 V DC (RES) or 240 V AC (GEN), 2 A/P, 4 A/C and 16 A/U; at 240 V AC (P.D.), 180 VA/P, 720 VA/C and 1440 VA/U. Those printed limits must be read together with terminal grouping and the unit instructions. Two RJ45 sockets and PORT1 A/B LINK/ACT indicators are visible, but the photos do not establish the installed program, network settings or a live communication test.
| Item | Evidence |
|---|---|
| Identity | Omron CP2E-N30DR-D; Ver. 1.0 |
| Supply | 24 V DC, 20 W; SELV source stated on body label |
| Inputs | 18 points; label separates ten at 7.6 mA and eight at 5 mA, all 24 V DC |
| Outputs | 12 relay-output points; front legends 100CH 00–07 and 101CH 00–03 |
| Contact ratings | 24 V DC resistive / 240 V AC general: 2 A/P, 4 A/C, 16 A/U; 240 V AC pilot duty: 180 VA/P, 720 VA/C, 1440 VA/U |
| Visible interfaces | Two RJ45 Ethernet sockets; screw terminals behind covers |
| Label environment | Ambient −20 to +60 °C; installation conditions require exact instructions |
| Lot and manufacturing statement | 14X25M; MADE IN CHINA on unit and photographed box |
| Quantity and delivery terms | Ten recorded; ten boxes photographed; new, one-year warranty; 10 March 2026 |
| Record weight | 1 kg; not a measured bare-controller weight |
Swipe or scroll horizontally to read the full table.
Specifications above are transcribed from the upright body nameplate and terminal legends. Quantity, condition and warranty come from the supply entry. An unpacked example has minor housing marks; the photographs do not establish the seal condition or functional status of every unit.
Matching this part
Provide the complete CP2E suffix, supply voltage, input wiring and output load types. Check output common groups and load duty before using the printed current or VA limits; the supply and relay ratings describe different circuits.
Confirm the required Ethernet configuration, project transfer method and expansion arrangement against the exact controller documentation. Request power-up and I/O checks if they are part of acceptance; this photo set contains no run log or program backup.
Photos and recorded media
Recorded inspection clip. The clip is retained as delivery evidence; no performance measurement is inferred from it.
Related records and products
The separate CP1W-MAD44 analog I/O record documents an expansion module. Confirm support and expansion limits for your exact host configuration. Contact KOEED with the controller suffix and wiring requirements.
Request this part
Send CP2E-N30DR-D, quantity, supply and I/O requirements. Ask for available lot, power-up evidence, delivery condition and written warranty terms.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
