0187098X PLC Industrial Automation Controller - Advanced Control Solution
On this page
What is the 0187098X friction plate?
Ten brand-new large friction plate assemblies, part number 0187098X inkjet-marked on every plate with a QR traceability code — the friction discs for the Winergy BE30 / BM30-31 to BM62 holding brake family, the park/holding brake inside wind-turbine and heavy-drivetrain gear units. Each plate carries a segmented (piston-cut) friction facing on its outer ring, a hardened internal-spline steel hub at the centre riveted through the core plate, a black damping ring between hub and facing, and — the detail that matters at overhaul — a curved spring ring seated in the spline root (visible in the close-up) that helps the plate separate when the brake releases. Every plate weighs about 2 kg, carries its own 0187098X/0003 spray code plus QR, and arrived new with the original film on some units. Recorded 27 November 2025 as a ten-piece lot, one-year warranty. Fourteen photos plus the warehouse video below.
Part details
| Field | Value |
|---|---|
| Part number | 0187098X — inkjet spray code 0187098X/0003 with QR on each plate |
| Fits | Winergy BE30 / BM30 / 31 · BM30–BM62 series holding (park) brake — per the matching listing |
| Product | Wet/oiled brake friction plate assembly for heavy-duty drivetrains |
| Facing | Segmented friction ring, radial piston cuts, bonded to a steel core plate |
| Hub | Internal straight spline (fine pitch), riveted to the core with a ring of screws |
| Detail | Curved spring ring seated in the spline root; black damping ring at the hub-to-facing joint |
| Traceability | Individual spray code + QR on each plate (both faces); an additional plant code on some plates |
| Weight | About 2 kg per plate |
| Condition / quantity | Brand new, original — 10 plates |
| Intake recorded | 27 November 2025 |
| Warranty | One year |
Why this plate is specified, not substituted
A holding brake plate lives a different life from a clutch plate: it sits clamped for weeks, then must release cleanly and take a full stop-torque event without glazing. That is why the details in these photos are not cosmetic. The segmented facing lets oil flow across the surface so a long-clamped plate does not stick to its separator; the black ring at the hub damps the micro-movement that would otherwise chew the spline; and the spring ring in the spline root pushes the plate off the pack the instant hydraulic pressure drops — without it, released plates drag, cook the oil, and the brake "wears" while the turbine thinks it is parked. When the brake is opened for service, match the new plates by the spray code and QR on the steel, not by outside diameter alone: sibling Winergy brake sizes in the BE/BM range look alike but differ in spline and thickness, and the code is the only part of the plate that cannot lie.
Photos
All images below are original warehouse photos of the exact plates covered by this record, taken before dispatch. Click any photo to view it full size.
The same plate is listed in our shop as the 0187098X holding brake pad (BE30/BM30–BM62) product page.
Sourcing help
KOEED supplies wind-turbine brake friction plates, gearbox parts and drivetrain spares in traceable new stock. Send the part number for a quote.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
