ACDP-240E02 Industrial Power Supply: 24V 10A 240W Automation Solution

8. новембар 2025.

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

What is the Sony ACDP-240E02 power adapter?

The ACDP-240E02 is Sony's 240 W external AC adapter — 100–240 V AC input at 50/60 Hz (2.6 A), 24 V DC ⎓ 10 A output, built by Dongguan Shingi Electronics for Sony in China, with the full approval row on the label (cULus Listed E192039, CCC S&E, SAA R33021, TIS 1195-2536, Safety Mark R-41057584, PSE, Energy Verified). The record covers a batch of these adapters received across several intakes as used stock — the intake notes grade the condition plainly as not great (成色不是很好) — so the photo set shows several units of the same type, dated 2017-02 through 2017-12, with matching labels (part 149311751/149311752), surface wear on the cases, and both leads included: the AC cord (C14 inlet, Volex/BAOHING cords) and the DC output lead with its locking plug. Serial 17122010147 from the intake note is one of the photographed units. Each ships with a three-month warranty; they passed through the Koeed warehouse from 27 October 2025, and the photos and video below are the honest record of what ships.

3 min readContent reviewed 6 October 2026

Part details

Sony ACDP-240E02 adapter, per label and record
Field	Value
Brand	Sony (AC ADAPTER / 电源适配器), built by Dongguan Shingi Electronics Co., Ltd — made in China
Model	ACDP-240E02; PART NO. 149311751 / 149311752
Input	100–240 V~ 50/60 Hz, 2.6 A
Output	24 V DC ⎓ 10 A (240 W); polarity marked on the label (centre variants per marking)
Build dates	2017-02 / 2017-03 / 2017-07 / 2017-08 / 2017-10 / 2017-12 across the photographed units
Serials seen	17022006385, 17032003865, 17072027149, 17072034299, 17082020396, 17102001781, 17122010147 (matches the intake note)
Certification	cULus Listed E192039, PSE, CCC S&E, SAA R33021, TIS 1195-2536, S-MARK R-41057584, Energy Verified, Gc, VI
Leads	AC cord (C14 inlet; Volex VAC17S 10 A 250 V~ and BAOHING cords in the set) + DC output lead with locking plug
Condition	Used — intake grades it "not great" (成色不是很好); scuffs, rub marks and label wear visible in the photos; both leads included
Warranty	Three months (per intake record)
Intake recorded	27 October 2025 and later batches

Scroll sideways to see the full table.

Why the 24 V / 10 A rating matters

This adapter class powers a wide range of 24 V industrial loads — displays, control panels, small servers, audio racks — and the ACDP-240E02 is the Sony original behind many of those systems. When replacing one, three checks matter: the output must be 24 V at 10 A (under-rating causes shutdowns under load), the DC plug must match the locking barrel type your device expects, and the label's polarity marking must agree with the load. The used grading is stated plainly here because these adapters show their service life: rub marks on the cases, worn label edges, and cord sets from more than one supplier. Function should be verified under load on the bench before trusting one in production — the photos are the honest record of the cosmetics.

Photos and video

All images below are original warehouse photos of the exact adapters covered by this record, taken before dispatch. Click any photo to view it full size.

C14 inlet, second unit — Second unit: C14 inlet end with both leads behind.

Full set, second unit — Second unit, full set: brick, leads, and the label reading 2017-07 / serial 17072034299.

Case edge wear — Case edge: scuffs along the shell seam — consistent with the used grade.

Label face second angle — Label face, second angle: full data block on the 2017-07 unit.

Adapter with coiled leads — Coiled leads beside the brick: AC cord figure-eight plug and the DC lead.

Brick underside — Underside: the plain shell face, screw bosses at the corners.

Label close, serial visible — Label close: serial band and QR code on the 2017-07 unit.

Lead plugs: the AC figure-eight and the DC locking barrel side by side.

Case end profile: the long brick form factor of the 240 W class.

Set from above: leads crossing the brick, both connectors visible.

Label, 2017-07 serial 27149 — Another 2017-07 unit: serial 17072027149 — a third distinct adapter in the set.

Third unit full view: brick and leads, label face up.

C14 end, third unit — Third unit, C14 end: inlet and screw bosses.

Case shell wear — Shell wear: rub marks along the case — the used condition stated in the record.

Cord gauge print — Cord detail: N.M.(PS) IEC 60227 / 53(RVV) 2X0.75mm² 300/500V print on the lead.

Cord end detail — Cord end: the molded C13 connector, Volex VAC17S 10A 250V~ print (this frame pairs with the first inspection video).

Fourth unit label — Fourth unit: 2017-02 build, serial 17022006385 — the earliest date code in the set.

Fourth unit full — Fourth unit, full: brick with leads, label face up.

CN plug cord — AC cord detail: the CN three-pin plug moulding with its certification dots.

Cord coils: both leads tied, gauge print running the jacket.

Fifth unit label — Fifth unit: 2017-12 build, part 149311752, serial 17122010147 — the unit matching the intake note's serial.

Fifth unit angled: label and leads in frame (this frame pairs with the second inspection video).

Sixth unit label — Sixth unit: 2017-08 build, serial 17082020396.

Sixth unit full — Sixth unit, full set: brick, AC cord with CN plug, DC lead.

Seventh unit label — Seventh unit: 2017-10 build, serial 17102001781.

Seventh unit full — Seventh unit, full set: the newest-dated adapter in the photo record.

C14 inlet third angle — C14 inlet, another angle: pins clean across the units.

Case top plain — Plain case top: the scuffed shell of a working adapter.

Label macro: every field sharp — the reference photo for ordering against this exact type.

Label with serial band: part, serial and QR in one read.

Set flat, seventh unit — Set flat: the seventh unit with its leads laid out.

Case shell close: wear pattern on the long face (this frame pairs with the third inspection video).

Label face straight-on: the ACDP-240E02 data block at full legibility.

Leads over brick: AC and DC cords crossing the adapter shell.

DC plug close: the locking barrel connector (this frame pairs with the fourth inspection video).

CN plug close: the mains plug moulding and its certification marks.

Brick corner wear — Brick corner: edge wear from service — noted honestly in the used grade.

Full kit flat: adapter, both cords, everything that ships together.

Label end third angle — Label end, third angle: the data block from the DC-lead side.

Serial band close: part 149311751 with its white serial label and QR.

Adapter in hand — In hand: the weight and size of the 240 W brick at a glance.

C14 inlet fourth angle — C14 inlet, fourth angle: socket face with the maker marks in the moulding.

Label fifth angle — Label, fifth angle: the approval row — cULus, CCC, SAA, TIS, Safety Mark, PSE, Energy Verified.

Label with wear: another unit's data block, label surface scuffed but legible.

Leads tied: both cords strapped as they ship.

DC plug and AC plug: the two ends a replacement must match.

Label macro second — Label macro, second unit: same data, different serial — part 149311751 throughout.

Serial close: the white band with part and serial numbers.

Cord jacket print — Cord jacket: BAOHING LF print on the second cord type in the set.

Set with seventh unit — The set with the 2017-10 unit: adapter and both leads, ready to box.

Label final — Label, final view: SONY / 24V / ACDP-240E02 — the identity of the whole record in one frame.

Leads final — Leads, final view: AC cord and DC lead as a pair.

Adapter flat final — Adapter flat, final view: the 240 W brick as received.

Label sixth angle — Label, sixth angle: another unit's data block for the batch record.

C14 inlet final — C14 inlet, final: the mains entry as shipped.

Label seventh angle — Label, seventh angle: rating block with the serial band in frame.

DC lead final — DC lead, final: the locking output plug as it ships.

Adapter and leads final — Adapter and leads, final: the complete set — Sony ACDP-240E02, 24 V 10 A, used, both cords included.

Inspection video of this adapter batch, recorded at the Koeed warehouse.

For a new-in-box 24 V industrial supply from the same shelf, see the Siemens SITOP PSU300S 6EP1437-2BA20 set — 40 A DIN-rail units, documented the same way.