Phoenix Contact 1095802 SAC-8P-2,0-680/M12FS FDN Sensor/Actuator Cable: Complete Technical Guide
On this page
The item documented under record code 1095802 is a Nordson Saturn pneumatic solenoid-valve kit, not the Phoenix Contact sensor cable named in the retained article title. The package explicitly prints Nordson, Reorder Part no: 1095802, 24 VDC, .25 Cv and 1.5 WATTS. One unit is recorded on 2 March 2026.
Identification and delivery details
The metal valve body has Nordson cast into its side. One port face has two openings and the opposite face has three. The solenoid end has a transparent cover, an electrical connection opening and an orange manual control. The packaged kit includes additional plastic parts beside the valve. No cable coil or M12 cable assembly appears in the eight photographs.
The valve's printed panel gives 3.4–5.5 BAR (50–80 PSI), KIT P/N 1095802, 24 VDC, PEAK 0.21 AMPS and HOLD 0.063 AMPS. It also says INSTALL VALVE FOR 1–2 OPERATION STANDARD PILOT, next to a pneumatic symbol. These statements are transcribed as the valve's markings; they are not a machine-specific installation prescription.
The stock note describes one new original unit, records 24 VDC and explicitly states no warranty. The physical brand and kit category correct the article's Phoenix Contact identity, while its original title and address are retained. The 0.5 kg field is a recorded weight, and no actuation, leakage or measured Cv result is supplied.
| Item | Evidence |
|---|---|
| Actual brand and kit | Nordson Saturn; Reorder / KIT P/N 1095802 |
| Printed supply and package power | 24 VDC; 1.5 WATTS |
| Printed flow coefficient | .25 Cv, package statement; not measured |
| Valve pressure line | 3.4–5.5 BAR; 50–80 PSI |
| Printed currents | PEAK 0.21 AMPS; HOLD 0.063 AMPS |
| Other valve wording | INSTALL VALVE FOR 1–2 OPERATION STANDARD PILOT |
| Visible construction | Two-port and three-port faces; transparent solenoid-end cover; orange manual control |
| Delivery terms | One; recorded new original; explicitly no warranty |
| Date and weight | 2 March 2026; 0.5 kg recorded field |
Swipe or scroll horizontally to read the full table.
Source: all eight photographs and the stock note. The Nordson packaging and body markings establish this valve kit's identity; the retained Phoenix Contact cable title is not evidence of the delivered product.
Matching this part
Request Nordson kit 1095802 with the existing valve and applicator identification. Compare the pneumatic port arrangement, electrical connection, pilot requirement and the machine's required valve function. The numeric code alone is insufficient when another manufacturer's catalogue uses the same number.
Supply photographs of the original valve symbol and its mounted orientation. The label's peak and hold current figures describe different operating stages and should not be merged into one current value. Confirm the complete replacement and test requirements against the equipment documentation before specifying an offered kit.
Photos and recorded media
Related records and products
Send the Nordson equipment model and original valve photographs through the contact page. Use the Saturn kit identity in the enquiry, while the article's retained address continues to carry its earlier cable wording.
Request this part
Request Nordson Saturn 1095802 with quantity, equipment model, valve symbol and port photographs. Confirm the new/original recorded condition and the record's explicit no-warranty term.
Need a quote for this part?
Send us the part number or article link — we will confirm price, availability and lead time.
