Schneider Electric ATV61 W814857810111A01 Variable Speed Drive: Complete Industrial Motor Control Solution

5. фебруар 2026.

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

What this delivery is: one used power and driver board for the Schneider Electric Altivar ATV61 inverter family, carried in our records under the marking W814857810111A01, received 2026-02-05, 1 kg. Before anything else, a correction to the listing title: this is not a complete variable speed drive. It is the drive's main control-and-power board — the large double-sided PCB that carries the switch-mode supply, the IGBT gate-drive stage and the interface headers inside an ATV61 cabinet — sold as the replacement part for a failed drive. Condition is 85% new per the receiving record, pulled from a working removal, with a one-year warranty from us.

What the board carries

The board is a dense two-layer layout under a full conformal-coating film, which is why it photographs glossy. The switch-mode section is built around an ER351M073 V5L3 transformer and a pair of large radial electrolytics; the drive stage clusters blue 470 µF 36 V capacitors beside TO-220 passes on small heatsinks, with TVS parts (TVS3010, TVS3011, TVS3031, TVS4011, TVS4031, TVS870, TVS871) protecting each sense line. Gate pulses reach the IGBTs through A316U pulse transformers, and the control side runs through optocouplers — PC604 and PC605 visible among them.

Interfaces: a 40-pin box header marked S100 takes the flat-cable connection to the ATV61 control/keyboard assembly, and white Molex-style headers S200, S202, S300, S301, S302, S303, S400, S500 and S510 carry fans, feedback and the power-stage harness. Two factory barcode labels sit on the board — SR0611000055 / 14B57820212A04 and SR0811000055 / 14B57B2271ZAD4 — plus an in-circuit test label and a blue inspection sticker on the rear. One handwritten service note dated 2016-07-19 remains from the board's earlier life; the coating and soldering around it look untouched.

Item	Value on the board / record
Product	Power and driver board for Schneider Electric Altivar ATV61 drives, record marking W814857810111A01 — a board, not a complete drive
Switch-mode stage	ER351M073 V5L3 transformer, two large radial electrolytics, ceramic discharge resistor
Gate drive	A316U pulse transformers, TO-220 passes on heatsinks, 470 µF 36 V blue electrolytics, TVS3010/3011/3031/4011/4031/870/871 protection
Interfaces	S100 40-pin box header to the control/keyboard assembly; S200/S202/S300/S301/S302/S303/S400/S500/S510 harness headers
Markings	Barcodes SR0611000055 / 14B57820212A04 and SR0811000055 / 14B57B2271ZAD4; ICT test label; blue inspection sticker; handwritten service note dated 2016-07-19
Condition / quantity / weight	Used, 85% new; 1 board; 1 kg; received 2026-02-05; 1-year warranty

Why the board is the repair

When an Altivar 61 dies, the failure is usually on this board — a blown snubber, a shorted gate transformer, cooked electrolytics — while the chassis, rectifier and operator panel stay fine. Schneider's own service flow treats the board as the line-replaceable unit: swap it, re-enter the drive's parameter set, and the cabinet is back. The catch is lead time; the board is a service part, not a catalogue item, so shops that run ATV61 fleets keep a spare on the shelf precisely the way this one was kept. Before you order, match your failed board's barcode against the labels listed above and check the transformer marking — ATV61 power stages differ by frame size, and the board must be the same build as the one it replaces.

Photos

ATV61 power and driver board, component side — The full board, component side: conformal-coated layout with the ER351M073 V5L3 switch-mode transformer centre-frame, the two large electrolytics top-right, heatsinked TO-220 passes to their left, and the S100 40-pin header along the lower edge.

Gate-drive area close-up — The driver strip in close-up: blue 470 µF 36 V electrolytics, resistor arrays and TO-220 gates above, TVS-protected sense lines and the S301/S302/S303 harness headers below.

Switch-mode corner with blue capacitors — Board corner detail: three 470 µF 36 V blue capacitors beside the transformer, TO-220 packages on their heatsink profiles, the S300 header and TVS3010/TVS3011 suppression parts along the edge.

Transformer and control IC section — The power-supply and control section: ER351M073 V5L3 transformer, the two big input electrolytics, ceramic resistor, finned heatsink, and the control IC cluster with its optocouplers and S100/S200 headers.

Board seen from the opposite end — The board from the opposite end: same coating film, the SR0811000055 / 14B57B2271ZAD4 barcode at the near edge, and the handwritten service note with its 2016 date mid-board.

Full board, vertical framing — Vertical framing of the whole board: harness headers and the S100 header along the top edge, gate-drive bank mid-frame, switch-mode section at the bottom with the ER351M073 V5L3 transformer readable.

Pulse transformers and optocouplers close-up — Gate-drive detail: A316U pulse transformers, thick-film resistor arrays, PC604/PC605 optocouplers, and the factory barcode SR0611000055 / 14B57820212A04 beside the handwritten 2016-07-19 service note.

Video walkthrough of the board, both sides.

Rear of the board, coating and test points — Rear side detail: the conformal coating over the traces, the ICT test label with its 2016 date, and the 40-pin connector footprint for S100.

Board edge with S100 header and harness connectors — The lower edge: 40-pin S100 box header for the control cable, the S400/S500/S200 harness headers with their designators, and one of the board's relays at top right.

Full rear side of the board — The complete rear side: coated traces and test pads across the panel, the blue inspection sticker near the centre, and the four nylon standoffs at the corners.

Related products on KOEED

If you are keeping ATV61 spare parts on the shelf: the PN072130P905 inverter board for Altivar ATV61 is the companion power stage, the VX4A61100Y ATV61 CPU control board covers the control side, and for a full cabinet replacement there is the ATV61HD11N4Z 11 kW drive.

Need the W814857810111A01 ATV61 driver board, a matching power stage, or a barcode check against your failed board before you order? Send the part number and photos of your board — we confirm the match.

Request a quote