Untitled

The R-2000iC/210F record shows a small yellow robot-arm model in fitted foam. Its second photograph carries FANUC Robot R-2000iC and 210F wording, matching the complete source identifier. The evidence describes a model representation, without establishing a working industrial robot system.

Identification and delivery details

The first photograph shows the model's rear/side arrangement: a grey base, yellow arm and joints, red and black details, and a grey loop resembling a cable. No electrical function is assigned to that loop or to the joint features.

The second photograph shows the arm marking FANUC Robot R-2000iC 210F above the same style of grey base and yellow foam-lined carton. It supplies the readable full identity that was not visible in the first view.

The note dated 26 February 2026 names Fanuc and explicitly records one new item. Its 1kg weight has no stated weighing scope, and neither manufacturing origin nor warranty duration is specified. The visible branding does not independently certify the model's maker or licensing.

This is a separate source note and photo set from the adjacent R-2000IC-210 record, whose note gives 1.5kg. The differing weights are not silently harmonised, and a similar model appearance does not establish combined present stock or distinct delivery history.

All seven source photographs are retained, with no source clip. Only the first two photographs were visually reviewed; later images carry neutral source captions. No scale ratio, material declaration or powered joint motion is established.

The linked catalogue entry explicitly describes the full R-2000iC/210F manipulator-arm model. The model category and visible identifier support that link; industrial payload, controller compatibility and production commissioning claims do not follow from this representation.

Swipe or scroll horizontally to read the full table.

The full 210F marking and model category are visible. This source's 1kg is kept separate from the neighbouring record's 1.5kg; neither similar imagery nor an article link establishes extra current stock.

Matching this part

Specify the required model representation's full identifier, maker, scale, dimensions and accessory contents. Clarify whether movable features or powered operation are actually required.

Confirm present condition, quantity, packing and warranty for the particular offered model. Use model-appropriate acceptance criteria rather than specifications for a production robot.

Photos and recorded media

Related records and products

View the FANUC Robot R-2000IC-210F 3D Manipulator Arm Model Vertical Multiple-Joint catalogue listing. Confirm the exact configuration and condition; a catalogue entry does not identify this delivered unit. The adjacent R-2000IC-210 record describes a similar model under a separate source note and weight entry.