Delta DVP14SS211R Programmable Logic Controller: Complete Technical Guide and Applications

Delta DVP14SS211R Programmable Logic Controller: Complete Technical Guide and Applications

Pre-shipment Inspection Record: This document details the visual and technical inspection of the Delta DVP14SS211R Programmable Logic Controller: Complete Technical Guide and Applications. All product photos and testing videos below are original materials captured first-hand by the Koeed technical team in our warehouse prior to dispatch.

What is the Delta DVP14SS211R?

The DVP14SS211R is Delta's slim DVP-SS2 PLC main unit — 14 points (8 digital inputs, 6 relay outputs rated 1.5 A / 250 VAC or 0.3 A / 30 VDC), a mini-DIN RS-232 programming port, an RS-485 link on its own terminal pair, and an extension port for Delta's I/O modules, all in a body that mounts on a standard DIN rail. Firmware V4.00A3, approvals CE / UKCA / EAC / UL (E206327, Ind. Cont. Eq.) / CCC, designed at Delta's Taoyuan works and made in China. One wiring note matters before anything else: this set of three carries both supply variants under the same model string — one unit's label reads POWER INPUT 100…240 V AC 1.5 A (serial …24391532), another reads 24 Vdc 1.8 W with the ⏚ / 0V / 24V terminals to match (serial …24391524) — so confirm the nameplate against your supply before wiring. Three units, new in factory boxes, 1-year warranty as recorded at intake. All 13 photos and 1 video below show these exact units.

3 min readContent reviewed

Part details

DVP14SS211R, as printed on the labels and housing
Field Value
Model Delta DVP14SS211R (CPU MODULE, 可編程序控制器)
I/O 14 points — 8 inputs / 6 relay outputs
Output rating Relay 1.5 A / 250 VAC, 0.3 A / 30 VDC resistive load
Supply (label variant A) POWER INPUT 100…240 V, 1.5 A, 50/60 Hz (serial …24391532)
Supply (label variant B) POWER INPUT 24 Vdc, 1.8 W — ⏚ / 0V / 24V terminals (serial …24391524)
Comms mini-DIN RS-232 programming port; RS-485 (−/+) terminal pair; extension port
Front controls RUN/STOP slide switch; POWER / RUN / ERROR LEDs; "R" relay-output marking
Serials / firmware 14SS211RW24391524 / …530 / …532; V4.00A3
Approvals CE, UKCA, EAC, UL CERTIFIED E206327 (Safety US CA, Ind. Cont. Eq.), CCC
Origin Made in China — Delta Electronics (No. 18, Xinglong Rd., Taoyuan City 330477, Taiwan; Delta Electronics Europe Ltd., Glasgow)
Included Extension cable in bag, Quick Start manual (DVP-SS2)
Quantity 3 units, new in factory boxes; 1-year warranty as recorded at intake
Shipping weight 0.84 kg per unit as recorded
Scroll sideways to see the full table.

Values are read from the unit labels, the terminal engravings and the factory boxes in the photo set; the two supply-label variants are shown exactly as printed.

The 14-point workhorse, and the label that decides the wiring

Every panel has a controller size that does most of the work, and on Delta-built machines that size is the 14-point SS2: enough I/O for a single-axis station, a small process skid or a machine safety interlock, with the extension port held in reserve for when the job grows. The six relay outputs at 1.5 A / 250 VAC drive contactor coils, lamps and small solenoids directly — no interposing relays needed at these ratings — and the eight 24 V inputs take the standard sensor fleet. Comms are the SS2's quiet strength: the mini-DIN RS-232 port is where the programming cable lands, the RS-485 pair lets the controller join a Modbus network as master or slave, and the extension port carries Delta's right-side I/O modules. The detail this page exists to record is the supply label: of the three boxed units, the nameplates show one printed for 100…240 V AC mains and another for 24 Vdc at 1.8 W — the latter matched by the ⏚/0V/24V terminal engraving on its base and the RS-485 pair beside it. Delta has shipped the 14SS211R string across both supply builds in this generation, and the practical rule is the one any panel builder already lives by: read the nameplate, not the model number, before landing the power wires. Firmware V4.00A3 on all three, fresh factory boxes, Quick Start manuals and the extension cable in the bag — three units ready for a line, with one spare over the bench minimum.

Photos and video

All images below are original KOEED warehouse photos. Click any photo to view it full size.

Front face with terminals
The front face: DVP-14SS2 marking, the mini-DIN programming port, the RUN/STOP slide switch with POWER / RUN / ERROR LEDs, the "R" relay marking, and both green terminal blocks — with the extension cable and Quick Start manual beside.
Top grille and extension
The top: ventilation louvres over the electronics, the extension-port connector cover, and the green power terminals at the end.
Top angled view
The body angled: slim SS2 profile, the DIN-rail clip edge, and the terminal rows — the footprint that packs 14 points into a narrow cabinet.
DELTA logo top
The top embossing: DELTA mark over the louvre bank — factory shell as boxed.
Label AC variant
The AC-variant label (serial 14SS211RW24391532): POWER INPUT 100...240V, 1.5A, 50/60Hz — OUTPUT RELAY 1.5A 250VAC / 0.3A 30VDC LOAD — V4.00A3, Taoyuan and Glasgow addresses, UKCA, EAC, UL E206327, CE, 可編程序控制器, MADE IN CHINA.
Three units in boxes
All three as boxed: each unit cradled in its carton with the Quick Start manual above — serials …524, …530 and …532 across the set.
Three boxes side by side
The three factory boxes: identical labels except the serials — 24391532, 24391524 and 24391530 — all V4.00A3, all MADE IN CHINA.
Label DC variant
The second label variant (serial …24391524): POWER INPUT 24Vdc 1.8W — OUTPUT MODULE 1.5A 250Vac 50/60Hz RES LOAD — with the EXTENSION PORT cover and the Delta service QR below: the supply difference between the units, printed plainly.
DIN clip
The DIN-rail clip: the white release tab and spring latch — the mount that lands the unit on a 35 mm rail.
DC label close-up
The 24Vdc label at close range: POWER INPUT 24Vdc 1.8W legible, serial 14SS211RW24391524, the UL E206327 file and the 25-year recycle mark — read this plate before wiring.
Top embossing full
The top shell full view: louvre banks and the DELTA embossing, terminal rows peeking below.
Base terminals 0V 24V RS-485
The base engraving that settles the supply question: the ⏚ / 0V / 24V power terminals on the DC-variant unit, with the RS-485 (−/+) green pair beside them — DC in, network out.
Side profile full
The complete unit in profile: DVP-14SS2 marking, mini-DIN port, both terminal blocks and the louvre shell — the slim controller as it mounts.
Inspection video: the units as they were checked at the KOEED warehouse.

Sourcing help

KOEED supplies this product, in active and EOL stock. Send the part number for a quote.

Need a quote for this part?

Send us the part number or article link — we will confirm price, availability and lead time.

WhatsApp us

Related Articles

Tillbaka till blogg