PSRD006: delivery record

19 augusti 2026

Historical parts record: Photos and notes below belong to this record. Confirm the offered unit’s full model, condition and available test evidence before ordering.

The rear label identifies HANDY PULSER, TYPE PSRD006 and NIDEC SANKYO CORPORATION. The reviewed front carries brother lettering on the handwheel. These markings describe the photographed pendant without certifying compatibility with every Brother CNC machine.

Identification and delivery details

The first photograph shows the black rear cover, carry loop, coiled cable and four corner screws. The label reads HANDY PULSER and TYPE PSRD006, with NIDEC SANKYO CORPORATION below. The serial entry is not interpreted as a manufacture date.

The second view shows the front handwheel with a numbered circular scale and metal handle, two selector knobs and HANDY PULSER wording. Brother lettering is visible on the wheel. No pulse output, selector contact or machine motion test is demonstrated.

The note dated 27 October 2025 explicitly records one item described as new and original with a two-year warranty. Manufacturer and country of origin are not stated in the tag; the reviewed rear label supplies the manufacturer marking, while new-original condition remains a source declaration.

The source contains two weights: the weight field and opening tag say 2kg, while a later tag entry says 1.5kg. Neither entry defines its weighing scope. Both are retained, without selecting one as a confirmed bare-unit or shipping weight.

All six source photographs are retained; the record has no clip. Only the first two photographs were visually reviewed. The photographed cable and controls do not establish connector pinout, pulse resolution or installed-machine compatibility.

The available KOEED catalogue candidate calls the item Brother-dedicated and offers a different warranty term. It does not explicitly identify the reviewed Nidec Sankyo manufacturer/variant, so it is not linked as a confirmed original-unit match. Full connector and machine-interface evidence is required before replacement.

Photographed markings and delivery record
Item	Evidence
Reviewed label type	HANDY PULSER / PSRD006
Reviewed manufacturer marking	NIDEC SANKYO CORPORATION
Front marking / controls	brother / handwheel and two selectors
Pulse resolution / pinout / machine fit	Not verified
Historical quantity / condition / warranty	One item / described as new and original / two years
Origin	Unspecified
Conflicting source weights	2kg and 1.5kg; both scopes unspecified
Record date	27 October 2025

Swipe or scroll horizontally to read the full table.

Rear manufacturer, front machine-brand marking and source supply terms are separately attributed. The conflicting 2kg and 1.5kg entries are not silently resolved or used as a shipment calculation.

Matching this part

Provide full offered-unit labels, selector legends, connector photographs and pinout documentation for PSRD006. Confirm the intended Brother machine/control and exact interface requirements.

Resolve the source weight scopes and agree present package contents, condition, quantity and warranty. Request a suitable pulse/selector acceptance result with the intended controller before commissioning.